Catégories
Documents disponibles dans cette catégorie (71)
Faire une suggestion Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Experimental Characterization of Influence of Gaseous Hydrogen on Fatigue Crack Propagation and Crack Tip Plasticity in Commercially Pure Iron / Tomoki SHINKO
Titre : Experimental Characterization of Influence of Gaseous Hydrogen on Fatigue Crack Propagation and Crack Tip Plasticity in Commercially Pure Iron Type de document : thèse Auteurs : Tomoki SHINKO, Auteur ; Gilbert HÉNAFF, Directeur de thèse ; Damien HALM, Directeur de thèse ; Institut PPRIME UPR CNRS 3346 - PMM, Commanditaire ; Afrooz BARNOUSH, Rapporteur ; Laurent BRIOTTET, Rapporteur ; Xavier FEAUGAS, Examinateur ; Isabelle AUBERT, Examinateur ; Milos DJUKIC, Examinateur Importance : 219 p. Note générale : NNT 2019ESMA0003
Acknowledgement
Table of Contents
Introduction
Appendix
References
Catégories : Dislocations dans les métaux
Essais dynamiques
Fer
Joints de grains
Matériaux:Fissuration
Métaux:Fatigue
Métaux:Fragilisation par l'hydrogène
Microscopie électronique à balayage
Plasticité
Rupture, Mécanique de laRésumé : STATE OF THE ART: HYDROGEN EMBRITTLEMENT
Résumé du chapitre
Introduction
Source of Hydrogen
Hydrogen Absorption
Hydrogen Transportation
Overview of Hydrogen Embrittlement
Influence of Hydrogen on Crack Propagation
Mechanism of Hydrogen Embrittlement
Motivation of Study
ANALYSIS OF INFLUENCE OF HYDROGEN ON PLASTIC DEFORMATION AND TENSILE FRACTURE
Résumé du chapitre
Introduction
Material
Tensile Test Under Gaseous Hydrogen
Discussion
Conclusion
ANALYSIS OF INFLUENCE OF GASEOUS HYDROGEN ON FATIGUE CRACK PROPAGATION
Résumé du chapitre
Introduction
Experimental Method
ΔK-Increasing FCG Test
ΔK-Constant FCG Test
Discussion
Conclusion
ANALYSIS OF INFLUENCE OF GASEOUS HYDROGEN ON CRACK TIP PLASTICITY
Résumé du chapitre
Introduction
Theoretical Plastic Zone Size
Optical Observation of Crack Path
Measurement of Out-Of-Plane Displacement
STEM Observation of Dislocation Structure
Discussion
Conclusion
DISCUSSION ON HYDROGEN-AFFECTED FATIGUE CRACK GROWTH MECHANISMS
Résumé du chapitre
Introduction
Mechanism of Hydrogen-Induced Intergranular Fracture in the Non-Acceleratd Regime
Mechnaism of Hydrogen-Induced QC Fracture in the Accelerated Regime
Transition from Intergranular to Transgranular Fracture
Dependencies of HAFCG on ΔK and Hydrogen Gas Pressure
Dependency of HAFCG on Loading Frequency
Criteria for HAFCG Enhancement
Conclusion
CONCLUSION
PROSPECTSEn ligne : https://tel.archives-ouvertes.fr/tel-02156722 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité TH-19 SHI SHI Numérique Thèses ISAE-ENSMA en ligne Thèses Exclu du prêt Finite Elements in Plasticity : Theory and Practice / OWEN, D., R., J.
Titre : Finite Elements in Plasticity : Theory and Practice Type de document : texte imprimé Auteurs : OWEN, D., R., J. ; E. HINTON Editeur : Swansea : Pineridge Press, Ltd. Année de publication : 1980 Importance : 594 p. ISBN/ISSN/EAN : 0-906674-05-2 Note générale : Contents
Appendices
Author Index
Subject IndexCatégories : Elasticité
Éléments finis, Méthode des
PlasticitéIndex. décimale : 519.4 Analyse numérique appliquée Résumé : Introduction
One-Dimensional Nonlinear Problems
Structure of Computer Programs for the Solution of Nonlinear Problems
Viscoplastic Porblems ine One Dimension
Elasto-plastic Timoshenko Beam Analysis
Preliminary Theory and Standard Subroutines for Two-Dimensional Elasto-plastic Applications
Elasto-Plastic Problems in Two Dimensions
Elasto-Viscoplastic Problems in Two Dimensions
Elasto-Plastic Mindlin Plate Bending Analysis
Explicit Transient Dynamic Analysis
Implicit-Explicit Transient Dynamic Analysis
Alternative Formulations and Further ApplicationsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00005501 519.4 OWE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible Formation des zones appauvries en précipitation γ' secondaire aux abords des joints de grains et impact sur les propriétés mécaniques des superalliages base nickel γ/γ' / Guillaume BURLOT
Titre : Formation des zones appauvries en précipitation γ' secondaire aux abords des joints de grains et impact sur les propriétés mécaniques des superalliages base nickel γ/γ' Type de document : thèse Auteurs : Guillaume BURLOT, Auteur ; Patrick VILLECHAISE, Directeur de thèse ; Jonathan CORMIER, Directeur de thèse ; Institut PPRIME UPR CNRS 3346 - PMM, Commanditaire ; Michel PEREZ, Rapporteur ; Vladimir ESIN, Rapporteur ; Clément KELLER, Examinateur ; Lola LILENSTEN, Examinateur Importance : 295 p. Note générale : NNT 2023ESMA0009
Remerciements
Table des matières
Introduction générale
Annexes
Résumé
Mots clés
Catégories : Alliages réfractaires:Propriétés mécaniques
Durcissement par vieillissement
Endommagement, Mécanique de l' (milieux continus)
Joints de grains
Microscopie électronique à balayage
Microstructure (physique)
Nickel:Alliages:Effets des hautes températures
PlasticitéRésumé : MÉCANISMES DE FORMATION DES ZONES APPAUVRIES EN PRÉCIPITATION γ' AUX JOINTS DE GRAINS
Table des matières
Mécanismes de formation des PFZ et matériaux de l'étude
Conditions de formation des PFZ
Traitements thermiques proches du solvus de la phase γ'
Description des mécanismes de formation des PFZ
Conclusion
Références
Index des illustrations
PROPRIÉTÉS EN TRACTION DE L'AD730TM HC EN PRÉSENCE DE ZONES APPAUVRIES EN PRÉCIPITATION γ' AUX JOINTS DE GRAINS
Table des matières
Influence des PFZ sur les propriétés mécaniques et les mécanismes de déformation
Propriétés en traction monotone à température ambiante
Propriétés en traction monotone à 700°C
Conclusion
Références
Index des illustrations
CONCLUSIONS GÉNÉRALES ET PERSPECTIVES
En ligne : https://theses.hal.science/tel-04285109 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité TH-23 BUR BUR Numérique Thèses ISAE-ENSMA en ligne Thèses Exclu du prêt Geometrical Foundations of Continuum Mechanics : An Application to First-and Second-Order Elasticity and Elasto-plasticity / Paul STEINMANN
Titre : Geometrical Foundations of Continuum Mechanics : An Application to First-and Second-Order Elasticity and Elasto-plasticity Type de document : texte imprimé Auteurs : Paul STEINMANN, Auteur Editeur : Springer Verlag Année de publication : 2015 Importance : 517 p. ISBN/ISSN/EAN : 978-3-662-46459-5 Note générale : Preface
Acknowledgements
Contents
References
IndexCatégories : Cinématique
Elasticité
Géométrie différentielle
Milieux continus, Mécanique des
PlasticitéIndex. décimale : 531 Mécanique classique, mécanique du solide Résumé : PROLOGUE
Motivation : Linear Crystal Plasticity
DIFFERENTIAL GEOMETRY
Preliminaries
Geometry on Connected Manifolds
Geometry on Metric Manifolds
Representations in Four-, Three-, Two-Space
NONLINEAR CONTINUUM MECHANICS
Continuum Kinematics
Elasticity
Elasto-Plasticity
EPILOGUE
Integrability and Non-Integrability in a Nutshell
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00014231 531 STE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible Influence d’imperfections surfaciques sur la tenue en fatigue de composants nucléaires / Paul CUSSAC
Titre : Influence d’imperfections surfaciques sur la tenue en fatigue de composants nucléaires Type de document : thèse Auteurs : Paul CUSSAC, Auteur ; Catherine HÉNAFF-GARDIN, Directeur de thèse ; Véronique PELOSIN, Directeur de thèse ; Institut PPRIME UPR CNRS 3346 - PMM, Commanditaire ; Sylvie POMMIER, Rapporteur ; Vincent MAUREL, Rapporteur ; Philippe BOMPARD, Examinateur ; Laurent de BAGLION DE LA DUFFERIE, Examinateur Importance : 248 p. Note générale : NNT 2020ESMA0001
Remerciements
Table des matières
Introduction et contexte
Références bibliographiques
Table des figures
Liste des tableaux
Annexes
Résumé
Mots clésCatégories : Acier inoxydable austénitique
Acier inoxydable:Fatigue
Déformations (mécanique)
Durée de vie (ingénierie)
Effet d'entaille
Industrie nucléaire
Matériaux:Fissuration
Plasticité
Surfaces:DéfautsRésumé : BIBLIOGRAPHIE
Généralités sur les aciers inoxydables austénitiques
Comportement en fatigue des aciers inoxydables austénitiques
Influence d'imperfections surfaciques sur la tenue en fatigue
Paramètres représentant la force motrice de propagation en élasto-plasticité
Amorçage et propagation de fissures en fatigue oligocyclique dans les aciers inoxydables austénitiques
Suivi de la propagation de fissure par le potentiel électrique
MATÉRIAU, MÉTHODES EXPÉRIMENTALES ET NUMÉRIQUES
Matériau, essais de fatigue et imperfections surfaciques
Procédure de réalisation des imperfections de surface
Caractérisation des imperfections surfaciques
Suivi expérimental de la propagation des fissures
Appui du numérique
RÉSULTATS EXPÉRIMENTAUX ET CALIBRATION DU SUIVI DE POTENTIEL ÉLECTRIQUE
Bilan des éprouvettes testés en fatigue
Comportement cyclique et durées de vie en fatigue en présence d'imperfections surfaciques
Description de l'amorçage et de la propagation de fissures en fatigue à partir d'imperfections surfaciques
Exploitation des données expérimentales du suivi de potentiel au travers d'une calibration adaptée
ANALYSE DES RÉSULTATS EXPÉRIMENTAUX ET DISCUSSION
Cinétiques de propagation des fissures à partir des imperfections de surface
Paramètre mécanique adapté pour décrire la propagation de fissures en plasticité généralisée
Analyse de la durée de vie en fatigue en présence d'imperfections de surface
EXTENSION DE L'ÉTUDE À UN ACIER FAIBLEMENT ALLIÉ (18MND5)
Présentation du matériau
Comportement cyclique et durées de vie en fatigue oligocyclique
Amorçage et propagation des fissures à partir des imperfections surfaciques
Application de l'approche prédictive basée sur ΔKε au cas de l'acier 18MND5
CONCLUSIONS ET PERSPECTIVES
En ligne : https://tel.archives-ouvertes.fr/tel-02927004 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité TH-20 CUS CUS Numérique Thèses ISAE-ENSMA en ligne Thèses Exclu du prêt Intéraction couches d'oxyde et résistance à la fatigue de l'acier inoxydable 316L / Cyril VERNAULT
Titre : Intéraction couches d'oxyde et résistance à la fatigue de l'acier inoxydable 316L Type de document : thèse Auteurs : Cyril VERNAULT ; José MENDEZ, Directeur de thèse ; LMPM ENSMA UMR CNRS 6617, Commanditaire ; Bernard PIERAGGI, Rapporteur ; Jean-Loup STRUDEL, Rapporteur ; F. ARMANET, Examinateur ; Thierry MAGNIN, Examinateur ; Jean-Claude VAN DUYSSEN, Examinateur Importance : 297 p. Note générale : Remerciements
Contexte de l'étude
Référence bibliographiques
Conclusion
Table des matièresCatégories : Dislocations dans les métaux
Oxydation
Plasticité
Rupture, Mécanique de laIndex. décimale : TH-98 Résumé : CONTEXTE DE L'ETUDE
Intérêt industriel ou contexte technologique
Contexte scientifique
Le matériau
PROCESSUS D'OXYDATION
Approche thermodynamique de l'oxydation
Processus d'oxydation d'un alliage
Influence de la plasticité sur les processus d'oxydation
Oxydation des aciers "inoxydables"
OXYDATION - TECHNIQUES EXPERIMENTALES
Les échantillons
Méthodes expérimentales
OXYDATION - RESULTATS EXPERIMENTAUX
Oxydation isotherme sur matériau de référence
Etude de l'oxydation à 300°C - 100 h
Etude de couches d'oxyde élaborées en milieu industriel
Discussion
Oxydation isotherme sur matériau pré-déformé
PROCESSUS D'ENDOMMAGEMENT PAR FATIGUE
Les structures de dislocations
Les bandes de glissements
La fissuration
Influence de l'environnement
Comportement mécanique des couches d'oxyde
FATIGUE - TECHNIQUES EXPERIMENTALES
Les éprouvettes
Les essais de fatigue
Conditions de pré-traitements des éprouvettes
Méthodes d'observation
Quantification de l'endommagement
FATIGUE - RESULTATS EXPERIMENTAUX
Etude préliminaire des oxydes
Comportement mécanique cyclique des échantillons pré-oxydés
Influence d'une pré-oxydation sur l'endommagement par fatigue sous vide
Influence d'une pré-oxydation sur l'endommagement par fatigue dans l'air
Influence d'une couche d'oxyde formée sur des éprouvettes pré-déformées par fatigue
Influence d'une pré-oxydation à 600°C sur la tenue en fatigue enduranceExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00006947 TH-98 VER Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Thèses Exclu du prêt Introduction à la mécanique non linéaire / Jean-Charles CRAVEUR
Titre : Introduction à la mécanique non linéaire : calcul des structures par éléments finis ; cours et exercices corrigés Type de document : texte imprimé Auteurs : Jean-Charles CRAVEUR, Auteur ; Philippe JETTEUR, Auteur Editeur : Dunod Année de publication : 2010 Importance : 349 p. ISBN/ISSN/EAN : 978-2-10-054603-9 Note générale : Table des matières
Avant-propos
Index alphabétiqueLangues : Français (fre) Catégories : Cinématique
Déformations (mécanique)
Mécanique non linéaire
PlasticitéIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Contraintes
Déformations
Lois de comportement
Mécanique linéaire
Mécanique non linéaire
Approche cinématique
Contraintes en non linéaire
Forces internes et matrice tangente
Méthodes numériques
Stabilité, flambage
Plasticité
Contact
Dynamique non linéaire
Divers
Hyperélasticité
Exercices stabilité, flambage
Exercices plasticité
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00008718 620.1 CRA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction to computational plasticity / Fionn DUNNE
Titre : Introduction to computational plasticity Type de document : texte imprimé Auteurs : Fionn DUNNE ; Nik PETRINIC Editeur : Oxford University Press Année de publication : 2009 Importance : 241 p. ISBN/ISSN/EAN : 978-0-19-856826-1 Note générale : Preface
Contents
Acknowledgments
Notation
Appendix
IndexCatégories : Plasticité Index. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : MICROPLASTICITY AND CONTINUUM PLASTICITY
Microplasticity
Continuum plasticity
Kinematics of large deformations and continuum mechanics
The finite element method for static and dynamic plasticity
Implicit and explicit integration of von mises plasticity
Implementation of plasticity models into finite element code
PLASTICITY MODELS
Superplasticity
Porous plasticity
Creep in an aero-engine combustor material
Cyclic plasticity, creep, and TMF
APPENDIX
Elements of tensor algebra
Fortran coding available via the OUP WebsiteExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00008301 620.11 DUN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction to the Theory of Plasticity for Engineers / Oscar HOFFMAN
Titre : Introduction to the Theory of Plasticity for Engineers Type de document : texte imprimé Auteurs : Oscar HOFFMAN ; George SACHS Editeur : McGraw-Hill Book Company, Inc. Année de publication : 1953 Importance : 276 p. Note générale : Preface
Contents
Notation
IndexCatégories : Plasticité Index. décimale : 531.38 Constantes élastiques, contraintes, déformation, élasticité Résumé : Basic laws and theories
Problems in plastic flow of ideally plastic materials
Problems in plastic flow of strain-hardening materials
Theory of metal-forming processesExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00002350 531.38 HOF Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible Mécanique des milieux continus : Introduction à la plastique des matériaux / Joël DOUIN
Titre : Mécanique des milieux continus : Introduction à la plastique des matériaux Type de document : texte imprimé Auteurs : Joël DOUIN Editeur : Diderot Editeur Année de publication : 1997 Collection : Pavages Importance : 138 p. ISBN/ISSN/EAN : 978-2-84352-035-8 Note générale : Sommaire
Introduction
IndexCatégories : Matériaux
Matériaux:Propriétés mécaniques
Milieux continus, Mécanique des
PlasticitéIndex. décimale : 531.38 Constantes élastiques, contraintes, déformation, élasticité Résumé : Notions de cristallographie
Déformation élastique
Déformation plastique macroscopique
Déformation plastique et défauts : dislocations
Dynamique des dislocations : écoulement plastiqueExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00001200 531.38 DOU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible B00006466 620.11 DOU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Mechanical Behavior of Materials / Marc André MEYERS
Titre : Mechanical Behavior of Materials Type de document : texte imprimé Auteurs : Marc André MEYERS, Auteur ; Krishan K. CHAWLA, Auteur Mention d'édition : Second Edition Editeur : Cambridge : Cambridge Univeristy Press Année de publication : 2009 Importance : 856 p. ISBN/ISSN/EAN : 978-0-521-86675-0 Note générale : Contents
Preface to the First Edition
Preface to the Second Edition
A Note to the Reader
Appendix
IndexLangues : Anglais (eng) Catégories : Composites
Matériaux
Matériaux:Propriétés mécaniques
Plasticité
Résistance des matériauxIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Materials: Structure, Properties, and Performance
Elasticity and Viscoelasticity
Plasticity
Imperfections: Point and Line Defects
Imperfections: Interfacial and Volumetric Defects
Geometry of Deformation and Work-Hardening
Fracture: Macroscopic Aspects
Fracture: Microscopic Aspects
Fracture Testing
Solid Solution, Precipitation, and Dispersion Strengthening
Martensitic Transformation
Special Materials: Intermetallics and Foams
Creep and Superplasticity
Fatigue
Composite Materials
Environmental EffectsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité b00009128 620.11 MEY Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Mechanics and Plasticity of Structures / A. SAWCZUK
Titre : Mechanics and Plasticity of Structures Type de document : texte imprimé Auteurs : A. SAWCZUK ; J. SOKOL-SUPEL ; J.M. ALEXANDER Editeur : Ellis Horwood limited Année de publication : 1989 Collection : Ellis Horwood series in mechanical engineering Importance : 203 p. ISBN/ISSN/EAN : 978-0-85312-954-7 Note générale : Table of contents
Preface
From the editor
Introduction
IndexCatégories : Mécanique
Plasticité
PlastiquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Perfect plasticity
Simple plastic theories
Associated flow law
Strain hardening
Limit analysis
Interaction surfaces
Bar systems
Theory of plastic plates
Yiel line theory
Cylindrical shells
Shakedown theoryExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003234 620.1 SAW Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Mechanics of Elastic-Plastic Fracture / PARTON, V., Z.
Titre : Mechanics of Elastic-Plastic Fracture Type de document : texte imprimé Auteurs : PARTON, V., Z. ; E. M. MOROZOV Mention d'édition : second edition, revised Editeur : Hemisphere Publishing Corporation Année de publication : 1985 Importance : 522 p. ISBN/ISSN/EAN : 978-0-89116-606-1 Note générale : Contents
Preface to the second edition
Foreword
Appendix
References
IndexCatégories : Elasticité
Plasticité
Rupture, Mécanique de la
ViscoélasticitéIndex. décimale : 531.38 Constantes élastiques, contraintes, déformation, élasticité Résumé : Fondamentals of fracture mechanics
Mechanisms of crack formatin and growth
Stress intensity factor
Cracks in elastic-plastic bodies
Cracks in inelastic-plastic bodies
Cracks in linear viscoelastic solids
Special problems of fracture mechanics
Environmental effects upon crack growth
Thermal problems in fracture mechanics
Mechanics of fracture in presence of electromagnetic fields
Dynamic problems of fracture mechanicsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003467 531.38 PAR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible Mechanics of Plastic Deformation in Metal Processing / Erich G. THOMSEN
Titre : Mechanics of Plastic Deformation in Metal Processing Type de document : texte imprimé Auteurs : Erich G. THOMSEN ; Charles T. YANG ; Shiro KOBAYASHI Editeur : Macmillan Company, Ltd Année de publication : 1965 Importance : 486 p. Note générale : Preface
Contents
Appendix
Supplementary references
IndexCatégories : Déformations (mécanique)
Métaux
PlasticitéIndex. décimale : 531.38 Constantes élastiques, contraintes, déformation, élasticité Exemplaires (3)
Code-barres Cote Support Localisation Section Disponibilité B00002351 531.38 THO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible B00002352 531.38 THO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible B00002353 531.38 THO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible Mise en forme des matériaux : Prévision par le calcul / J.-P. BERNADOU
Titre : Mise en forme des matériaux : Prévision par le calcul Type de document : texte imprimé Auteurs : J.-P. BERNADOU Editeur : Ecole Nationale Supérieure de l'Aéronautique et de l'Espace - Sup'Aéro (ENSAE) Année de publication : 1989 Importance : 114 p. Note générale : Sommaire
AnnexesCatégories : Matériaux
Matériaux:Propriétés mécaniques
PlasticitéIndex. décimale : 531.38 Constantes élastiques, contraintes, déformation, élasticité Résumé : Lois de la plasticité
Méthodes de calcul
Tests
Application aux procédés de mise en formeExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00000892 531.38 BER Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible Modélisation des instabilités plastiques et du comportement de post-localisation en hydroformage de tubes / Daly DALY
Titre : Modélisation des instabilités plastiques et du comportement de post-localisation en hydroformage de tubes Type de document : thèse Auteurs : Daly DALY ; Jean-Marc ROELANDT, Directeur de thèse ; Mohamed RACHIK, Directeur de thèse ; Université de Technologie (Compiègne), Commanditaire ; Adnan IBRAHIMBEGOVIC, Rapporteur ; Alain POTIRON, Rapporteur ; Jean-Claude GELIN, Examinateur ; Patrick DUROUX, Examinateur ; Pascal GEOFFROY, Examinateur ; Michel BELLET, Examinateur ; Joël WILSIUS, Examinateur Importance : 201 p. Note générale : Remerciements
Table des matières
Avant-propos
Annexe
Résumé
Mots clésCatégories : Déformations (mécanique)
Effet de striction (physique)
Éléments finis, Méthode des
Formage sous haute énergie
PlasticitéIndex. décimale : TH-05 Résumé : PROCEDES D'HYDROFORMAGE DE TUBES
Les différentes techniques d'hydroformage
Les enjeux de l'hydroformage de tubes
Les limites du procédé d'hydroformage de tubes
Les essais de caractérisation des tubes pour hydroformage
Importance de la simulation numérique
PROBLEMATIQUE LIEE A LA THESE
Problématique en hydroformage de tubes
Objectifs de la thèse
Plan du mémoire
INSTABILITES PLASTIQUES
Nature des aciers utilises et mécanismes de déformation
La localisation des déformations
COMPORTEMENT DE POST-LOCALISATION
Simulation numérique de la post-localisation
Limites des modèles continus classiques - Aspects théoriques
Récapitulatif des paramètres utilisés pour la simulation
Etude paramétrique
METHODE DE REGULARISATION
Modèles de régularisation
Description et implémentation de deux techniques particulières
RESULTATS DE LA SIMULATION NUMERIQUE
Résultats
Etude de la sensibilité à la vitesse de déformation
IDENTIFICATION DE MODELES DE COMPORTEMENT SENSIBLES A LA VITESSE DE DEFORMATION
Modèles de comportement à grande vitesses pour les aciers
Identification des paramètres
OPTIMISATION ET CONTROLE DE PROCEDE
Optimisation du contrôle de l'hydroformage de tubes
Description des la démarche utilisée
Résultats numériques
CONCLUSION ET PERSPECTIVESExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00007012 TH-05 DAL Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Thèses Exclu du prêt Modélisation tridimensionnelle de la fermeture induite par plasticité lors de la propagation d'une fissure de fatigue dnas l'acier 304L / Saverio FIORDALISI
Titre : Modélisation tridimensionnelle de la fermeture induite par plasticité lors de la propagation d'une fissure de fatigue dnas l'acier 304L Type de document : thèse Auteurs : Saverio FIORDALISI, Auteur ; Catherine HÉNAFF-GARDIN, Directeur de thèse ; Christine SARRAZIN-BAUDOUX, Directeur de thèse ; Institut PPRIME UPR CNRS 3346 - PMM, Commanditaire ; Stéphane MARIE, Rapporteur ; Thierry PALIN-LUC, Rapporteur ; Alain COMBESCURE, Examinateur ; Fernando VENTURA ANTUNES, Examinateur ; Stéphane PIERRET, Examinateur Importance : 202 p. Note générale : NNT 2014ESMA0018
Remerciements
Sommaire
Introduction générale
Annexes
Références
Résumé
Mots clésCatégories : Acier inoxydable:Fatigue
Contraintes (mécanique)
Éléments finis, Méthode des
Matériaux:Fissuration
Modélisation tridimensionnelle
Plasticité
Python (langage de programmation)
Rupture, Mécanique de laRésumé : ETUDE BIBLIOGRAPHIQUE
Concepts généraux de la mécanique de la rupture
Propagation de fissures par fatigue
Simulation numérique de la fermeture de fissures par fatigue
Comparaison des méthodes avec et sans prédéfinition de la forme des fronts de fissure : état de l'art
MODELES NUMERIQUES AVEC GEOMETRIES PREETABLIES
Introduction
Présentation de la méthode
Comparaisons des résultats des modèles avec fronts droits, courbes progressifs et courbes réguliers
Autres fronts géométriques préétablis
Comparaison des fronts géométriques préétablis
Conclusions
MODELES DE PREDICTION DE LA FORME DE FISSURE
Introduction
Modèle numérique de prédiction de la forme de fissure sans remaillage
Modèle numérique de prédiction de la forme de fissure avec remaillage
RESULTATS EXPERIMENTAUX ET DIALOGUE EXPERIMENTAL-NUMERIQUE
Introduction
Démarche expérimentale
Dialogue expérimental-numérique
Conclusions
CONCLUSIONS GENERALES
PERSPECTIVESEn ligne : https://tel.archives-ouvertes.fr/tel-01129079 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00010778 TH-14 FIO Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Thèses Exclu du prêt Non-linear Finite Element Analysis of Solids and Structures : 2., Advanced Topics / M. A. CRISFIELD
Titre : Non-linear Finite Element Analysis of Solids and Structures : 2., Advanced Topics Type de document : texte imprimé Auteurs : M. A. CRISFIELD Mention d'édition : volume 2 Editeur : John Wiley & Sons, Inc. Année de publication : 1997 Importance : 494 p. ISBN/ISSN/EAN : 978-0-471-95649-5 Note générale : Schémas, graph.
Contents.
Preface.
Index.Catégories : Éléments finis, Méthode des
Mécanique
Plasticité
Structures à parois mincesIndex. décimale : 531 Mécanique classique, mécanique du solide Résumé : More continuum mechanics.
Non-orthogonal coordinates and co- and contravariant tensor components.
More finite element analysis of continua.
Large strains, hyperelasticity and rubber.
More plasticity and other material non-linearity.
Large rotations.
Three dimensional formulations for beams and rods.
More on continuum and shell elements.
Large strains and plasticity.
Stability theory.
Branch switching and further advanced solution procedures.
Examples from an updated non-linear finite element computer program using truss elements.
Contact with friction.
Non-linear dynamics.Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00001214 531 CRI Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible Non-Local Modeling of the Compressive Strength of Composite Structures / Anil BETTADAHALLI CHANNAKESHAVA
Titre : Non-Local Modeling of the Compressive Strength of Composite Structures Titre original : Modélisation non-locale de la résistance en compression des composites architecturés Type de document : thèse Auteurs : Anil BETTADAHALLI CHANNAKESHAVA, Auteur ; Jean-Claude GRANDIDIER, Directeur de thèse ; Institut PPRIME UPR CNRS 3346 - PMM, Commanditaire ; Soraia PIMENTA, Rapporteur ; Jean-François GANGHOFFER, Rapporteur ; Sylvain DRAPIER, Examinateur ; Vincent KERYVIN, Examinateur ; Pierre-Yves MECHIN, Examinateur Importance : 264 p. Note générale : NNT 2020ESMA0018
Acknowledgements
Abstract & Keywords
Résumé & mots-clés
Table of Contents
List of Figures
List of Tables
Appendix
References
Summary of Chapters in FrenchCatégories : Composites à fibres de carbone
Elasticité
Éléments finis, Méthode des
Essais de compression
Flambage (mécanique)
Microstructure (physique)
Plasticité
Rupture, Mécanique de la
StratifiésRésumé : INTRODUCTION
ABOUT COMPOSITES
Classification of Composites
Laminated Composites
Woven Composites
Defects from Process/Manufacturing Techniques
Specific Case: Long Carbon Fiber Reinforced Composites
Behavior of Composite Materials
STRENGTH OF COMPOSITE MATERIALS UNDER COMPRESSION (EXPERIMENTS AND MODELS)
Compression tests
Four Point Flexion Compression Frixture
Strength of Long Fiber UD Composites
Strength of Woven Composites
SCOPTE OF WORK AND OUTLINE
Work Package/Outline
NON-LOCAL MODEL FOR UD COMPOSITES WITH STRUCTURAL ELEMENTS OF ABAQUS®
Introduction
Beam Non-Local Model: Building the Model
Conclusion
GENERALIZED NON-LOCAL MODEL FOR UD AND WOVEN COMPOSITES - NUMERICAL MODEL (UEL ABAQUS®)
Introduction
Theoretical Part
Numerical Development
VALIDATION OF NL U32 ELEMENT (LINEAR CASE)
Linear Geometry and Linear IsotropicElastic Case
GEOMETRICAL NON-LINEARITY IN NL U32: DESCRIPTION AND VALIDATION
Formulation and Addition of Geometrical Non-Linearity
Validation of Geometrical Non-Linearity
MATRIX MATERIAL NON-LINEARITY IN NL U32: DESCRIPTION OF THE LAW AND VALIDATION
Formulation and Addition of Matrix Material Non-Linearity (Isotropic)
Validation of Matrix Material Non-Linearity
IDENTIFICATION OF PARAMETERS
Indentification of Elastic and Non-Local Parameters
Identification of Non-Linear Material Parameters
COMPRESSIVE RESPONSE OF NON-LOCAL COMPOSITES
Unidirectional Case
Woven Case
CONCLUSION AND PERSPECTIVESEn ligne : https://tel.archives-ouvertes.fr/tel-03166430 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité TH-20 BET BET Numérique Thèses ISAE-ENSMA en ligne Thèses Exclu du prêt Numerical Analysis of Viscoelastic Problems / Patrick LE TALLEC
Titre : Numerical Analysis of Viscoelastic Problems Type de document : texte imprimé Auteurs : Patrick LE TALLEC Editeur : Masson Année de publication : 1990 Importance : 136 p. ISBN/ISSN/EAN : 978-2-225-82093-9 Note générale : Contents
Preface
Bibliography
IndexCatégories : Analyse numérique
Plasticité
ViscoélasticitéIndex. décimale : 519.4 Analyse numérique appliquée Résumé : Convex analysis and optimization
The mechanical models
Viscoelastic solids of burger's type
Maxwell materials : the quasistatic case
Numerical algorithms
Fluids with memoryExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00001108 519.4 LET Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible B00006507 519.4 LET Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible Plane-Strain Slip-Line Fields for Metal-Deformation Processes / W. JOHNSON
Titre : Plane-Strain Slip-Line Fields for Metal-Deformation Processes Type de document : texte imprimé Auteurs : W. JOHNSON ; R. SOWERBY ; R.D. VENTER Mention d'édition : First edition Editeur : Pergamon Press, Ltd Année de publication : 1982 Importance : 364 p. ISBN/ISSN/EAN : 978-0-08-025452-4 Note générale : Preface
Contents
Introduction
References
Appendices
Additional references
Author index
Subject indexCatégories : Déformations (mécanique)
PlasticitéIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
General plasticity theory
Basic theory of plane plastic flow
Application to specific problems
Applications to specific processes : bibliography
Matrix-operator methods for solving plane-strain slip-line field problems
Plasticity problems for other than plane-strain conditionsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003233 620.1 JOH Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Plane-Strain Slip-Line Fields : Theory and Bibliography / W. JOHNSON
Titre : Plane-Strain Slip-Line Fields : Theory and Bibliography Type de document : texte imprimé Auteurs : W. JOHNSON ; R. SOWERBY Editeur : Edward Arnold (Publishers) Ltd Année de publication : 1970 Importance : 176 p. ISBN/ISSN/EAN : 978-0-7131-3221-2 Note générale : Preface
Contents
Introduction
Appendix
Author index
Subject indexCatégories : Déformations (mécanique)
PlasticitéIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
General plasticity theory
Basic theory of plane plastic flow
Application to specific problems
Application to processes : bibliography
Plasticity problems for other than plane-strain conditions : breif survey of literatureExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00002345 620.1 JOH Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Plastic Deformation of Amorphous and Semi-Crystalline Materials : Lectures given at an International Spring School Les Houches, France, 19-29 April 1982 / Bertrand ESCAIG
Titre : Plastic Deformation of Amorphous and Semi-Crystalline Materials : Lectures given at an International Spring School Les Houches, France, 19-29 April 1982 Type de document : symposium Auteurs : Bertrand ESCAIG, Éditeur scientifique ; Christian G'SELL, Éditeur scientifique Editeur : Les Editions de Physique Année de publication : 1982 Importance : 405 p. ISBN/ISSN/EAN : 978-2-902731-50-3 Note générale : Table of Contents
Organization Committee
Introduction
List of Participants
ReferencesCatégories : Cristaux
Déformations (mécanique)
Matériaux amorphes
PlasticitéIndex. décimale : 531.38 Constantes élastiques, contraintes, déformation, élasticité Résumé : Mechanical aspects
Dislocation theory
Linear viscoelasticity
Glass transition and molecular mobility
Plastic deformation
Plastic deformation of semi-crystalline polymers
Molecular orientation and deformation localizationExemplaires (5)
Code-barres Cote Support Localisation Section Disponibilité B00004110 531.38 / 1982 Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Symposia [Congrès PMM et Fluides] Exclu du prêt B00004116 531.38 / 1982 Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Symposia [Congrès PMM et Fluides] Exclu du prêt B00004139 531.38 / 1982 Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Symposia [Congrès PMM et Fluides] Exclu du prêt B00006168 531.38 / 1982 Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Symposia [Congrès PMM et Fluides] Exclu du prêt b00006472 531.38 / 1982 Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Symposia [Congrès PMM et Fluides] Exclu du prêt Plastic Instability (Instabillités plastiques)
Titre : Plastic Instability (Instabillités plastiques) Type de document : texte imprimé Editeur : Presses de l'Ecole Nationale des Ponts et Chaussées Année de publication : 1985 Importance : 335 p. ISBN/ISSN/EAN : 978-2-85978-081-4 Note générale : Avant-propos
Comité scientifique et d'organisation
Table des matières
Liste des auteursCatégories : Déformations (mécanique)
PlasticitéIndex. décimale : 621.1 Technique de la vapeur Résumé : Dealing with the prediction of the forming limit curves
Evaluation of deforming limit for simulation of sheet metal forming
Effect of anisotropic hardening and thermomechanical coupling on sheet formability
The development of strain gradients in sheet metal forming processes
The effect of strain path on the plastic instability
Analysis of the forming limits in planar-isotropic thermoviscoplastic shett-metals
Wrinkling of curved, thin sheet metal
Theoretical prediction of load instability in biaxial stretching of polymer films
On the effects of plastic rotation on the localization of anisotropic elastoplastic solids
Bifurcation par localisation et non linéarité incrémentale : un exemple heuristique d'analyse complète
The localization of deformation in finitely strained shells
Initiation and propagation of shear bands in antiplane shear deformationShear bans Localization in ductile porous materials
Predictions of flow localization during high temperature torsional deformation of Ti-6Al-2Sn-4Zr-2Mo-0, 1Si
Determination of stress triaxality during the necking of high density polyethylene
Growth of interface imperfections in layered plastic solids
Bifurcation et analyse post-critique en rupture fragile et en plasticité
Analyse du problème en vitesse pour les matériaux à configuration physique
Bifurcation behaviour of thin square elastic-plastic orthotropric plates subjected to diagonal tension
On energy criteria of plastic instability
Détermination par éléments finis en grandes déformations des courbes limites de formage en contraintes
Inertia, stability and ductililty in uniaxial tension at high strain rate
Material strain-rate sensitivity in the round tensile bar
Les différentes échelles du développement de l'endommagement dans les aciers. Influence sur la localisation de la déformation à l'échelle micorscopique
Influence on inhomogeneity of deformation on plastic instability in copper
Texture-induced plastic instability in metal working
Effect of heat generation and transfer on plastic instability and flox localization during torsion and tension testing
The influence of rate sensitivity on instabilities
Some remarks on bifurcation in solids obeying non-associated flow laws
The real nature of shear bands-palstons ?Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003232 621.1 PLA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Plastic Theory of Structures / Michael R. HORNE
Titre : Plastic Theory of Structures Type de document : texte imprimé Auteurs : Michael R. HORNE Editeur : Nelson Année de publication : 1971 Importance : 173 p. ISBN/ISSN/EAN : 978-0-17-771004-9 Note générale : Contents
Preface
Introduction
IndexCatégories : Plasticité
Structures à parois mincesIndex. décimale : 531.38 Constantes élastiques, contraintes, déformation, élasticité Résumé : Plastic failure
Methods of plastic analysis
Plastic moments under shear force and axial load
Minimum weight design
Variable repeated loading
StabilityExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00002341 531.38 HOR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 500 - Sciences - Mathématiques Disponible