Détail de l'indexation
Ouvrages de la bibliothèque en indexation 620.1 (234)
Faire une suggestion Affiner la recherche
Mechanical Behavior of Materials / William F. HOSFORD
Titre : Mechanical Behavior of Materials Type de document : texte imprimé Auteurs : William F. HOSFORD Mention d'édition : 2nd reprinted ed. Editeur : Cambridge : Cambridge Univeristy Press Année de publication : 2013 Importance : 419 p. ISBN/ISSN/EAN : 978-0-521-19569-0 Note générale : Contents
Preface
Appendices
IndexCatégories : Contraintes (mécanique)
Déformations (mécanique)
Elasticité
Matériaux:Essais dynamiques
Matériaux:Fatigue
Matériaux:Propriétés mécaniques
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Stress and Strain
Elasticity
Mechanical Testing
Strain Hardening of Metals
Plasticity Theory
Strain rate and Temperature of Flow Stress
Slip and Crystallographic Textures
Dislocation Geometry and Energy
Dislocation Mechanics
Mechanical Twinning and Martensitic Shear
Hardening Mechanisms in Metals
Discontinuous and Inhomogeneous Deformation
Ductility and Fracture
Fracture Mechanics
Viscoelasticity
Creep and Stress Rupture
Fatigue
Residual Stresses
Ceramics and Glasses
Polymers
Composites
Mechanical WorkingExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00014389 620.1 HOS Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Mechanics and Plasticity of Structures / A. SAWCZUK
Titre : Mechanics and Plasticity of Structures Type de document : texte imprimé Auteurs : A. SAWCZUK ; J. SOKOL-SUPEL ; J.M. ALEXANDER Editeur : Ellis Horwood limited Année de publication : 1989 Collection : Ellis Horwood series in mechanical engineering Importance : 203 p. ISBN/ISSN/EAN : 978-0-85312-954-7 Note générale : Table of contents
Preface
From the editor
Introduction
IndexCatégories : Mécanique
Plasticité
PlastiquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Perfect plasticity
Simple plastic theories
Associated flow law
Strain hardening
Limit analysis
Interaction surfaces
Bar systems
Theory of plastic plates
Yiel line theory
Cylindrical shells
Shakedown theoryExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003234 620.1 SAW Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible "Mechanics - Microstructure - Corrosion" Coupling : Concepts, Experiments, Modeling and Cases / Christine BLANC
Titre : "Mechanics - Microstructure - Corrosion" Coupling : Concepts, Experiments, Modeling and Cases Type de document : texte imprimé Auteurs : Christine BLANC, Auteur ; Isabelle AUBERT, Auteur Editeur : ISTE Press, Ltd Année de publication : 2019 Importance : 551 p. Note générale : Contents
Acknowledgements
Introduction
List of Authors
IndexCatégories : Matériaux:Détérioration
Matériaux:Fissuration
Matériaux:Propriétés mécaniques
Microstructure (physique)
Science des matériauxIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Environmentally Assisted Cracking: Some Critical Aspects
THE BASICS FOR UNDERSTANDING MECHANICS-ENVIRINMENT-MICROSTRUCTURE COUPLINGS
The basics to better Understand Couplings in Physical Metallurgy
Continuum Mechanics
Fatigue Crack Initiation and Porpagation
Surface Chemistry and Passivation of Metals and Alloys
Electrochemistry for Mechanically-Assited Corrosion
Modeling Tools: From the Atom to the Macroscopic Scale
HYDROGEN AND THE EMBRITTLMENT OF METALIC MATERIALS
State of Hydrogen in Matter: Fundamental Ad/Absorption, Trapping and transport Mechanism
Hydrogen and Crystal Defects Interactions: Effects on Plasticity and Fracture
Industrial Consequences of Hydrogen Embrittlement
Experimental Techniques for Dosage and Detection of Hydrogen
STRESS CORROSION CRACKING
Effect of Stress/Strain Fields on Electrochemical Activity: Metallurgy/Stress Interaction and Surface Reactivity
Stress Corrosion Cracking. Between the Corrosion Defect and the Long Crack: the Phase of the Initiation of the Cracks
Stress Corrosion Crack Propagation
Oxidation-Assisted Cracking
Stress Corrosion Cracking: From In-Service Cracking to Laboratory Studies
CORROSION FATIGUE
Corrosion and Hydrogen Fatigue at Different Scales
Local-Scale Modeling of Plasticity-Environement Interactions
Specific Cases of Corrosion Fatigue
ADDITIONAL INFORMATION AND THE PATHS TO SOLVING
Local Electrochemical Methods Adapted to Studying Environment-Microstructure-Mechanics Couplings
Mechanical tests in Corrosive Environments and Under Gaseous Hydrogen
Liqui Metal EmbrittlementExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00014479 620.1 BLA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/09/2026 Mechanics of Composite Materials / CHRISTENSEN, R., M.
Titre : Mechanics of Composite Materials Type de document : texte imprimé Auteurs : CHRISTENSEN, R., M. Editeur : John Wiley & Sons, Inc. Année de publication : 1979 Importance : 348 p. ISBN/ISSN/EAN : 978-0-471-05167-1 Note générale : Preface
Contents
Author Index
Subject IndexCatégories : Composites
Composites:Propriétés mécaniquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Some elements of mechanics
Effective moduli : spherical inclusions
Effective moduli : cylindrical and lamellar systems
Bounds on effective moduli and further results
Laminates
Analysis, strength and design
Wave propagation
Inelastic and nonlinear effects
Effective thermal propertiesExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004091 620.1 CHR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Mechanics of Composite Materials and Structures presented at the University of California, San Diego, La Jolla, July 9-12, 1989 / Junuthula Narasimha REDDY
Titre : Mechanics of Composite Materials and Structures presented at the University of California, San Diego, La Jolla, July 9-12, 1989 Type de document : symposium Auteurs : Junuthula Narasimha REDDY, Éditeur scientifique ; TEPLY, J., L., Éditeur scientifique Editeur : American Society of Mechanical Engineers (ASME) Année de publication : 1989 Importance : 62 p. ISBN/ISSN/EAN : 978-0-7918-0345-5 Note générale : Foreword
ContentsIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : / Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00005077 620.1 / 1989 Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Symposia [Congrès PMM et Fluides] Exclu du prêt Mechanics of Engineering Materials / P. P. BENHAM
Titre : Mechanics of Engineering Materials Type de document : texte imprimé Auteurs : P. P. BENHAM ; CRAWFORD, R., J. Editeur : Longman Group, Ltd Année de publication : 1987 Importance : 626 p. ISBN/ISSN/EAN : 978-0-470-20704-8 Note générale : Contents
Preface
Notation
Appendix
IndexCatégories : Mécanique appliquée
Résistance des matériauxIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Statically-determinate force systems
Statically-determinate stress systems
Stress-strain relations
Statically-indeterminate stress systems
Torsion
Bending : stress
Bending : slope and deflection
Statically-indeterminate beams
Energy theorems
Structural analysis
Buckling instability
Stress and strain transformations
Yield criteria and stress concentration
Variation of stress and strain
Application of the equilibrium and strain-displacement relationships
Elementary plasticity
Thin plates and shells
Finite element method
Tension, compression, torsion and hardness
Fracture mechanics
Fatigue
Creep and viscoelasticityExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003631 620.1 BEN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Mechanics of Engineering Materials : Solutions Manual / P. P. BENHAM
Titre : Mechanics of Engineering Materials : Solutions Manual Type de document : texte imprimé Auteurs : P. P. BENHAM ; CRAWFORD, R., J. Editeur : Longman Group, Ltd Année de publication : 1987 ISBN/ISSN/EAN : 978-0-582-46239-7 Note générale : Contents
IntroductionCatégories : Matériaux
Matériaux:Propriétés magnétiques
MécaniqueIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Statically-determinate force systems
Statically-determinate stress systems
Stress-strain relations
Statically-indeterminate stress systems
Torsion
Bending : stress
Bending : slope and deflection
Statically-indeterminate beams
Energy theorems
Structural analysis
Buckling instability
Stress and strain transformations
Yield criteria and stress concentration
Variation of stress and strain
Application of the equilibrium and strain-displacement relationships
Elementary plasticity
Thin plates and shells
Finite element method
Tension, compression, torsion and hardness
Fracture mechanics
Fatigue
Creep and viscoelasticityExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003640 620.1 BEN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Mechanics of Fracture 1 : Methods of Analysis and Solutions of Crack Problems : Recent Developments in Fracture Mechanics, Theory and Methods of Solving Crack Problems / SIH, G., C.
Titre : Mechanics of Fracture 1 : Methods of Analysis and Solutions of Crack Problems : Recent Developments in Fracture Mechanics, Theory and Methods of Solving Crack Problems Type de document : texte imprimé Auteurs : SIH, G., C. Editeur : Leyden : Noordhoff International Publishing Année de publication : 1973 Importance : 517 p. ISBN/ISSN/EAN : 978-90-01-79860-4 Note générale : Contents
Introduction
Editor's preface
Contributing authors
References
Subject indexCatégories : Rupture, Mécanique de la Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : A special theory of crack propagation
Solutions of plane crack problems by mapping techniques
Method of Laurent series expansion for internal crack problems
Asymptotic approximations to crack problems
Alternating method applied to edge and surface crack problems
Field singularities and related integral expressions
Integral transform methods
Numerical solution of singular integral equations
Application of the finite element method to the calculation of strss intensity factors
Finite element methods for elastic bodies containig cracksExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003470 620.1 SIH Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Mechanics of solid interfaces / Muriel BRACCINI
Titre : Mechanics of solid interfaces Type de document : texte imprimé Auteurs : Muriel BRACCINI ; Michel DUPEUX Editeur : London : ISTE Ltd Année de publication : 2012 Importance : 300 p. ISBN/ISSN/EAN : 978-1-84821-373-9 Note générale : Table of contents
Foreword
List of authors
IndexCatégories : Adhésion (physique)
Interfaces (sciences physiques)
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : FUNDAMENTALS
Interfaces: the physics, chemistry, and mechanics of heterogeneous continua
Structure and defects of crystalline interfaces
SINGULARITIES, NOTCHES, AND INTERFACIAL CRACKS
Singularities and interfacial cracks
Interface adherence
PRACTICAL APPLICATIONS
Controlling adherence
Crac-interface interaction
Shock mechanics and interfaces
THIN FILMS
Coating-substrate interface
Damage in thin films on substrates
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00009815 620.1 BRA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Mechanics of Solids / Roger T. FENNER
Titre : Mechanics of Solids Type de document : texte imprimé Auteurs : Roger T. FENNER Mention d'édition : First edition Editeur : Blackwell Scientific Publications Année de publication : 1989 Importance : 625 p. ISBN/ISSN/EAN : 978-0-632-02018-8 Note générale : Contents
Computer programs
Preface
List of symbols
Introduction
Appendix
IndexCatégories : Mécanique
Mécanique des solidesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
Statically determinate systems
Relationships between stress and strain
Statically indeterminate systems
Bending of beams - Moments, forces and stresses
Bending of beams - Deflections
Torsion
Instability and the buckling of struts and columns
Transformations of stress and strain
Equilibrium and compatibility equations : applications to beams and thick-walled cylindersExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003715 620.1 FEN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Mechanics of Solids with Phase Changes / Marcel BERVEILLER
Titre : Mechanics of Solids with Phase Changes Type de document : texte imprimé Auteurs : Marcel BERVEILLER, Éditeur scientifique ; FISCHER, F., D., Éditeur scientifique Editeur : Springer Verlag Année de publication : 1997 Collection : CISM Courses and Lectures num. 368 Importance : 317 p. ISBN/ISSN/EAN : 978-3-211-82904-2 Note générale : Preface
ContentsCatégories : Mécanique des solides Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Thermodynamics and kinetics of phase transitions : an introduction
Interaction of stresse and strains with phase changes in metals : physical aspects
Experimental observations for shape memory alloys and transformation induced plasticity phenomena
Interactions between stresses and diffusive phase transformations with plasticity
Micromechanical modelling of the thermomechanical behavior of shape memory alloys
Modelling and simulation of transformation induced plasticity in elasto-plastic materials
Theory of pressure solution creep in wet compacting sediments
Application to shape memory devices
Application to heat treatment and surface treatment
Considering stress-phese transformation interactions in the calculation of heat treatment residual stressesExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004455 620.1 BER Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Méthode des éléments finis en mécanique des structures / Thomas GMÜR
Titre : Méthode des éléments finis en mécanique des structures Type de document : texte imprimé Auteurs : Thomas GMÜR Editeur : Presses Polytechniques et Universitaires Romandes (PPUR) Année de publication : 2000 Importance : 252 p. ISBN/ISSN/EAN : 978-2-88074-461-8 Note générale : Remerciements
Table des matières
Introduction
Annexes
Bibliographie
Liste des symboles
IndexCatégories : Aéronautique
Aéronautique:Recherche
Construction
Constructions, Théorie des
Constructions:Calcul
Éléments finis, Méthode des
Mécanique appliquée
Mécanique appliquée:Problèmes et exercices
Problèmes aux limitesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
Formulation intégrale d'un problème aux limites unidimensionnel
Généralisation de la forme failble aux problèmes unidimensionnels
Formulation intégrale d'un problème aux limites bidimensionnel
Application de la forme intégrale à l'élasticité linéaire
Exemples d'application
Espace fonctionnels associés aux formes fortes et faibles
Méthodes classiques de résolution des systèmes linéaires
Fonctions de base de quelques éléments finis archétypes
Formules d'intégration numérique de Gauss-Legendre
Matrices d'élasticité linéaireExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00004965 620.1 GMU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00006339 624.17 GMÜ Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Méthode des éléments finis pour les sciences de l'ingénieur. Abrégé de cours et recueil de problème corrigés / Joël CHASKALOVIC
Titre : Méthode des éléments finis pour les sciences de l'ingénieur. Abrégé de cours et recueil de problème corrigés Type de document : texte imprimé Auteurs : Joël CHASKALOVIC Editeur : Paris : Lavoisier Hermès Année de publication : 2004 Collection : Technique et Documentation Importance : 275 p. ISBN/ISSN/EAN : 978-2-7430-0708-9 Note générale : Avant-propos
Table des matières
Bibliographie
IndexCatégories : Analyse numérique
Analyse numérique:Applications industrielles
Éléments finis, Méthode des
Éléments finis, Méthode des:Applications industrielles
Mathématiques de l'ingénieur
SciencesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Abrégé de cours sur les éléments finis
Quelques classes fondamentales d'éléments finis
Formulations variationnelles
Eléments finis en mécanique des solides déformables
Eléments finis appliqués à la résistance des matériaux
Eléments finis appliqués aux problèmes non linéairesExemplaires (3)
Code-barres Cote Support Localisation Section Disponibilité B00004608 620.1 CHA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00005423 620.1 CHA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00005429 620.1 CHA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Méthode des singularités : 1., Théorie / J. BOUSQUET
Titre : Méthode des singularités : 1., Théorie Type de document : texte imprimé Auteurs : J. BOUSQUET Editeur : Ecole Nationale Supérieure de l'Aéronautique et de l'Espace - Sup'Aéro (ENSAE) Année de publication : 1988 Importance : 414 p. Note générale : Errata
Informations tecnhniques
Avertissement de l'auteur
Table des matières
Annexes
RéférencesCatégories : Aérodynamique
Distributions, Théorie des (analyse fonctionnelle)
Singularités (mathématiques)Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction intuitive à la méthode des singularités
Eléments de la théorie des distributions
Théorie des singularités
Application de la théorie des singularités dans le domaine incompressible bidimensionnel
Application de la théorie des singularités dans le domaine incompressible tridimensionnelExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004995 620.1 BOU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Méthode des singularités : 1.,Théorie / J. BOUSQUET
Titre : Méthode des singularités : 1.,Théorie Type de document : texte imprimé Auteurs : J. BOUSQUET Editeur : Ecole Nationale Supérieure de l'Aéronautique et de l'Espace - Sup'Aéro (ENSAE) Année de publication : 1986 Importance : 414 p. Note générale : Errata
Informations techniques
Avertissement de l'auteur
Table des matières
Annexes
RéférencesCatégories : Aérodynamique
Distributions, Théorie des (analyse fonctionnelle)
Singularités (mathématiques)Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction intuitive à la méthode des singularités
Eléments de la théorie des distributions
Théorie des singularités
Application de la théorie des singularités dans le domaine incompressible bidimensionExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00010367 620.1 BOU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Methods and Models for predicting Fatigue Crack Growth under Random Loading / CHANG, James, B.
Titre : Methods and Models for predicting Fatigue Crack Growth under Random Loading Type de document : texte imprimé Auteurs : CHANG, James, B., Éditeur scientifique ; HUDSON, C., M., Éditeur scientifique Editeur : American Society for Testing and Materials (ASTM) Année de publication : 1981 Collection : STP (Special Technical Publication) num. 748 Importance : 138 p. Note générale : Foreword
Contents
Introduction
Summary
IndexCatégories : Matériaux
Matériaux:Fatigue
Matériaux:Fissuration
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Round-Robin crack growth predictions on center-cracked tension specimens under random spectrum loading
A root-mean-square approach for predicting fatigue crack growth under random loading
A crack-closure model for predicting fatigue crac growth uner aircraft spectrum loading
Multi-parameter yield zone model for predicting spectrum crack growth
Crack growth behavior of center-cracked panel under random spectrum loading
Random spectrum fatigue crack life predictions with or without considering load interactionsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003913 620.1 CHA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Methods of Functional Analysis for Application in Solid Mechanics / Jayme MASON
Titre : Methods of Functional Analysis for Application in Solid Mechanics Type de document : texte imprimé Auteurs : Jayme MASON Editeur : Elsevier Science Publishers, Ltd Année de publication : 1985 Collection : Studies in Applied Mechanics num. 9 Importance : 392 p. ISBN/ISSN/EAN : 978-0-444-42436-5 Note générale : Preface
Contents
Introduction
References
IndexCatégories : Analyse fonctionnelle
Mécanique des solidesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00006308 620.1 MAS Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Micromécanique des matériaux granulaires / Bernard CAMBOU
Titre : Micromécanique des matériaux granulaires Type de document : texte imprimé Auteurs : Bernard CAMBOU ; Michel JEAN Editeur : Hermès Science Publications Année de publication : 2001 Importance : 332 p. ISBN/ISSN/EAN : 978-2-7462-0229-0 Note générale : Liste des auteurs
Table des matières
Introduction
Bibliographie
IndexCatégories : Micromécanique (physique du solide)
Milieux granulaires
Milieux granulaires:Propriétés mécaniquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : ANALYSE EXPERIMENTALE ET NUMERIQUE DES VARIABLES LOCALES
Variables de texture
Variables cinématiques
Localisation de la déformation
Variables d'efforts internes : méthodes, résultats expérimentaux et résultats numériques
Cas particulier des matériaux cohésifs
LES TECHNIQUES DE CHANGEMENT D'ECHELLE DANS LES MATERIAUX GRANULAIRES
Les éléments de base des techiques de changement d'échelle
Le changement d'échelle pour les variables de texture
Le changement d'échelle pour les variables statiques dans les matériaux granulaires
Le changement d'échelle pour les variables cinématiques dans les matériaux granulaires
L'homogénéisation périodique dans les matériaux granulaires
L'homogénéisation statistique dans les matériaux granulaires
Milieux continus complexes à partir d'une approche micromécanique
SIMULATION NUMERIQUE DISCRETE
Notations et conventions
Relations cinématiques
Lois de contact frottant
Equations réagissant une collection de grains en contact frottant
Préparation d'un échantillon
Résolution numérique : méthodes smooth DEM
Résolution numérique : méthodes non smooth DEM
Exemples de traitement du frottement
Evolutions quasi statiques et méthodes directes
Critères de qualité du calcul
Modélisation des milieux granulaires par automate cellulaire
Appendice : "thêta"-méthode et méthode de Newmark
Appendice : autres variantes NSCD
Appendice : calcul prallèle et autres méthodes distribuées
Appendice : lois dérivées des relations "Signorini, "mu"-Coulomb, standard"
Appendice : éléments d'analyse convexeExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003222 620.1 CAM Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Microstructural Design of Fiber Composites / Tsu-Wei CHOU
Titre : Microstructural Design of Fiber Composites Type de document : texte imprimé Auteurs : Tsu-Wei CHOU Editeur : Cambridge : Cambridge Univeristy Press Année de publication : 1992 Collection : Cambridge Solid State Science Series Importance : 569 p. ISBN/ISSN/EAN : 978-0-521-35482-0 Note générale : Contents
Preface
References
Author Index
Subject IndexCatégories : Composites à fibres
Microstructure (physique)Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
Thermoelastic behavior of laminated composites
Strength of continuous-fiber composites
Short-fiber composites
Hybrid composites
Two-dimensional textile structural composites
Three-dimensional textile structural composites
Flexible composites
Nonlinear elastic finite deformation of flexible compositesExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004042 620.1 CHO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Modélisation des structures par éléments finis : 1., Solides élastiques / Jean-Louis BATOZ
Titre : Modélisation des structures par éléments finis : 1., Solides élastiques Type de document : texte imprimé Auteurs : Jean-Louis BATOZ ; Gouri DHATT Editeur : Hermès Science Publications Année de publication : 1990 Importance : 455 p. ISBN/ISSN/EAN : 978-2-86601-243-4 Note générale : Avant-propos
Table des matières
Notations
Annexe
Bibliographie
IndexCatégories : Éléments finis, Méthode des
Solides élastiques
Solides élastiques:Modèles mathématiquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : INTRODUCTION
Solides et structures minces
Discrétisation par éléments finis
Contenu du premier volume "Solides élastiques"
PRINCIPES VARIATIONNELS EN MECANIQUE DES SOLIDES ELASTIQUES
Description d'une configuration
Contraintes et équations d'équilibre
Principe des travaux virtuels (ou des déplacements virtuels)
Théorie linéaire classique de l'élasticité
Energie potentielle totale
Principes variationnels mixtes
DISCRETISATION PAR ELEMENTS FINIS
Aspects généraux de la méthode des éléments finis
Représentation de la géométrie
Discrétisation de la forme variationnelle
Assemblage et résolution
Programme d'éléments finis
Eléments finis pour les problèmes d'élasticité
Tests de validation et de convergence
Remarques sur l'analyse de problèmes par éléments finisExemplaires (6)
Code-barres Cote Support Localisation Section Disponibilité B00000355 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00000717 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00000704 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00004222 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00004964 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 B00006402 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Modélisation des structures par éléments finis : 2., Poutres et plaques / Jean-Louis BATOZ
Titre : Modélisation des structures par éléments finis : 2., Poutres et plaques Type de document : texte imprimé Auteurs : Jean-Louis BATOZ ; Gouri DHATT Editeur : Hermès Science Publications Année de publication : 1990 Importance : 483 p. ISBN/ISSN/EAN : 978-2-86601-259-5 Note générale : Avant-propos et remerciements
Table des matières
Liste des tableaux
Notations
Annexes
Bibliographie
IndexCatégories : Éléments finis, Méthode des
Plaques (ingénierie)
PoutresIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : INTRODUCTION
Solides et structures minces
Discrétisation par éléments finis
Contenu du second volume "Poutres et plaques"
BARRES, POUTRES DROITES ET COURBES
Elément de barre
Formulation des poutres planes
Eléments finis de poutres planes
Structures planes
Eléments courbés
Poutres droites tridimensionelles
PLAQUES
Formulation des plaques
Eléments finis avec cisaillement transversal
Eléments de Kirchhoff sous forme discrète
Eléments de Kirchhoff
Tests de validation et performances des élémentsExemplaires (6)
Code-barres Cote Support Localisation Section Disponibilité B00000570 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00000341 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00000490 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00004204 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00005022 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 B00000576 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Modélisation des structures par éléments finis : 3., Coques / Jean-Louis BATOZ
Titre : Modélisation des structures par éléments finis : 3., Coques Type de document : texte imprimé Auteurs : Jean-Louis BATOZ ; Gouri DHATT Editeur : Hermès Science Publications Année de publication : 1992 Importance : 564 p. ISBN/ISSN/EAN : 978-2-86601-304-2 Note générale : Avant-propos
Table des matières
Liste des tableaux
Notations
Introduction
Annexe
Bibliographie
IndexCatégories : Constructions, Théorie des
Coques (ingénierie)
Éléments finis, Méthode des
Modèles mathématiquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : INTRODUCTION
Solides et structures minces
Discrétisation par éléments finis
Contenu du troisième volume "Coques"
COQUES ET REVOLUTION
Description géométrique
Formulation variationnelle (comportement axisymétrique)
Eléments finis de coques axisymétriques
Comportements non axisymétriques
COQUES DE FORMES QUELCONQUES
Description géométrique
Principe des travaux virtuels et formes variationnelles
Eléments isoparamétriques courbés (description cartésienne)
Eléments de type facettes planes
Eléments courbés (description curviligne)
Tests d'évaluation des éléments. Présentation et résultatsExemplaires (6)
Code-barres Cote Support Localisation Section Disponibilité B00000441 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00000564 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00000558 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00000536 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00003563 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00004210 620.1 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Modelling Problems in Crack Tip Mechanics : Proceedings of the Tenth Canadian Fracture Conference held at Waterloo, Ontario, Can. August 24-26, 1983 / Jerzy T. PINDERA
Titre : Modelling Problems in Crack Tip Mechanics : Proceedings of the Tenth Canadian Fracture Conference held at Waterloo, Ontario, Can. August 24-26, 1983 Type de document : symposium Auteurs : Jerzy T. PINDERA ; Bogdan R. KRASNOWSKI Editeur : Martinus Nijhoff Publishers Année de publication : 1984 Importance : 357 p. ISBN/ISSN/EAN : 978-90-247-3067-4 Note générale : Contents
Foreword
Preface to honorary chairman
Preface to the vice-president academic
Welcoming adress
Author indexCatégories : Rupture, Mécanique de la
Rupture, Mécanique de la:Modèles mathématiquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : / Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003481 620.1 /1983 Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Symposia [Congrès PMM et Fluides] Exclu du prêt MPSI-PCSI : Sciences industrielles pour l'ingénieur / Patrick BEYNET
Titre : MPSI-PCSI : Sciences industrielles pour l'ingénieur Type de document : texte imprimé Auteurs : Patrick BEYNET, Éditeur scientifique ; Christian COLLIGNON, Auteur ; Christophe DURANT ; Maxime GIROT ; Éric LAUMONIER ; Olivier TOURVIELLE Editeur : Ellipses Année de publication : 2011 Collection : Prépas sciences, ISSN 2111-4641 Importance : 732 p. ISBN/ISSN/EAN : 978-2-7298-6443-9 Note générale : Avant-propos
Sommaire
Table de notations
UnitésCatégories : Commande automatique:Manuels d'enseignement supérieur
Commande automatique:Problèmes et exercices
Ingénierie:Manuels d'enseignement supérieur
Mécanique:Manuels d'enseignement supérieur
Mécanique:Problèmes et exercices
Systèmes, Analyse deIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction à l'étude des systèmes
Les modèles de description fonctionnelle
Lecture de documents techniques
Introduction aux systèmes asservis
Modélisation des systèmes linéaires continus et invariants
Modélisation des S.L.C.I. asservis et schémas blocs
Réponse temporelle des S.L.C.I.
Étude fréquentielle des S.L.C.I.
Identification des S.L.C.I.
Position et orientation relative de deux solides indéformables
Composition de mouvements, vitesses et accélérations
Torseur distributeur des vitesses
Applications de cinématique graphique
Modélisation cinématique des liaisons
Mécanismes
Quelques transmetteurs de puissances simples
Modélisation des actions mécaniques
Résolution d'un problème de statique
Cas de forces coplanaires : résolution graphique
Systèmes combinatoires, algèbre de Boole, numération, codage
Les fonctions logiques combinatoires
Les fonctions logiques séquentielles
Le graphe fonctionnel à étapes et transition : le GRAFCETExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00011387 620.1 BEY Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Multi-Mechanism Modeling of the Inelastic Material Behaviour / Georges CAILLETAUD
Titre : Multi-Mechanism Modeling of the Inelastic Material Behaviour Type de document : texte imprimé Auteurs : Georges CAILLETAUD, Auteur ; Kacem SAI, Auteur ; Lakhdar TALEB, Auteur Editeur : London : ISTE Ltd Année de publication : 2018 Collection : Materials science series Importance : 266 p. ISBN/ISSN/EAN : 978-1-84821-580-1 Note générale : Contents
Preface
Introduction
Bibliography
IndexCatégories : Elasticité:Simulation, Méthodes de
Matériaux:Propriétés mécaniques
Plasticité:Modèles mathématiquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : State of the Art
Model Formulation
Typical MM Responses
Comparison with Experimental Databases
MM Damage-Plasticity Models
Finite Element ImplementationExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00011422 620.1 CAI Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026