BIBLIOTHÈQUE - ACCÈS LIBRE
600 - Sciences appliquées - Technologie > Techniques (Sciences appliquées) > Art de l'ingénieur et activités connexes > Généralités
![](./images/expand_all.gif)
![](./images/collapse_all.gif)
Titre : Fluid Structure Interaction : Applied Numerical Methods Type de document : texte imprimé Auteurs : Henri J.-P. MORAND ; Roger OHAYON Editeur : John Wiley & Sons, Inc. Année de publication : 1995 Importance : 212 p. ISBN/ISSN/EAN : 978-0-471-94459-1 Note générale : Contents
Preface
Bibliography
IndexCatégories : Acoustique
Construction
Construction:Dynamique
Dynamique des fluides
Dynamique des fluides:Modèles mathématiques
Hydroélasticité
Vibrations
ViscoélasticitéIndex. décimale : 620.10 Résumé : Vibrations of elastic structures
Linearized equations of small movements of inviscid fluids
Sloshing modes
Sloshing under surface tension
Hydroelastic vibrations
Hydroelastic vibrations under gravity
acoustic cavity modes
structural-acoustic vibrations
Modal reduction in fluid-structure interactionExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00005176 620.10 MOR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Formulaire du béton armé : 1., Eléments de calcul. Interface béton armé/charpentes métalliques. Règles BAEL 91. Eurocode 2. Règles parasismiques 92 / Victor DAVIDOVICI
Titre : Formulaire du béton armé : 1., Eléments de calcul. Interface béton armé/charpentes métalliques. Règles BAEL 91. Eurocode 2. Règles parasismiques 92 Type de document : texte imprimé Auteurs : Victor DAVIDOVICI ; Yves LE SELLIN Editeur : Editions du Moniteur Année de publication : 1996 Importance : 368 p. ISBN/ISSN/EAN : 978-2-281-11162-0 Note générale : Préface
Table des matières
Tableau de correspondance BAEL 91 - FormulaireCatégories : Béton armé
Construction
Constructions:CalculIndex. décimale : 620.13 Matériaux de construction : pierre, ciment, béton, liants de Résumé : DONNEES
Notations
Unités de mesure
Charges (actions)
Soliicitations de calcul (combinaison d'action)
Caractérisitques du béton
Caractéristiques des aciers
CALCUL DU BETON ARME
Hypothèses de calcul
Diagramme des déformations de la section : pivots
Calcul des sections en traction simple
Calcul des sections en flexion simple
Calcul des sections rectangulaires en flexion composée
Calcul des sections circulaires pleines en flexion composée
Flambement - Etat limite de stabilité de forme
Calcul des poteaux en compression "centrée" bâtiments courants
Calcul des sections à l'effort tranchant
Calcul des sections à la torsion
Calcul des flèches, déformations
Effets des variations linéaires
ASSOCIATION ACIER-BETON
Adhérence
Ancrage et recouvrement des barres
Entraînement des barres
Ancrage et entraînement des treillis soudés
Protection des armatures - Possibilité de batonnage correct
Scellement des barres dans le béton existant
DISPOSITIONS PARTICULIERES A CERTAINS ELEMENTS
Poteaux
Poutres
Dalles
Planchers à prédalles
Planchers à poutrelles préfabriquées
INTERFACE BETON ARME - CHARPENTE METALLIQUE OU EQUIPEMENT
Généralités
Pressions localisées
Interfaces : poteaux métalliques et fondations
Interfaces : pièces métalliques (ou équipement) et surfaces verticales
Interfaces : pièces métalliques (ou équipement) et sous-faces ou surfaces des planchers
Réservations : réalisation et remplissage
FixationsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004203 620.13 DAV Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Formulas for Stress and Strain Type de document : texte imprimé Auteurs : ROARK, Raymond, J. ; YOUNG, Warren, C. Mention d'édition : 5th edition Editeur : McGraw-Hill Book Company, Inc. Année de publication : 1975 Importance : 624 p. ISBN/ISSN/EAN : 978-0-07-053031-7 Note générale : Contents
List of Tables
Prefaces
Miscellaneous Tables (Factors of Stress Concentration. Properties of Materials)
Name Index
Subject IndexCatégories : Contraintes (mécanique)
Résistance des matériauxIndex. décimale : 620.112 Résumé : DEFINITIONS
FACTS ; PRINCIPLES ; METHODS
The behavior of bodies under stress
Principles and anlytical methods
Experimental methods
Properties of a plane area
FORMULAS AND EXEMPLES
Tension, compression, shear and combined stress
Beams ; Flexure of straight bars
Curved beams
Torsion
Flat plates
Columns and other compression members
Shells of revolution ; Pressure vessels ; Pipes
Bodies under direct bearing and shear stress
Elastic stability
Dynamic and temperature stressesExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004373 620.112 ROA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fractography and Failure Mechanisms of Polymers and Composites Type de document : texte imprimé Auteurs : ROULIN-MOLONEY, Anne, C. Editeur : Elsevier Science Publishers, Ltd Année de publication : 1989 Importance : 540 p. ISBN/ISSN/EAN : 978-1-85166-296-8 Note générale : Preface
Contents
List of Contributors
IndexCatégories : Composites
Fractographie
Polymères
Rupture, Mécanique de laIndex. décimale : 620.19 Autres matériaux Résumé : TECHNIQUES
Optical microscopy
Scanning electron microscopy
Transmission electron microscopy
Image analysis
Scanning secondary ion mass spectrometry (SIMS imaging)
Acoustic microscopy of polymers and polymer based composites
MATERIALS
Fractography and failure mechanisms of unfilled and particulate filled epoxy resins
Fractography and failure mechanisms of rubber modified epoxide resins
Fractography and failure mechanisms of carbon fiber-reinforced composite materials
Fractography and failure mechanisms of amorphous thermoplastics
Fractography and failure mechanisms of unfilled and short fiber reinforced semi-crystalline thermoplastics
Stress corrosion cracking in glass reinforced compositesExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00004137 620.19 ROU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00004248 620.19 ROU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fracture at High Temperatures Type de document : texte imprimé Auteurs : Hermann RIEDEL Editeur : Springer Verlag Année de publication : 1987 Collection : Materials Research and Engineering (MRE) Importance : 418 p. ISBN/ISSN/EAN : 978-0-387-17271-2 Note générale : Editor's Preface
Author's Peface
Contents
Appendices
References
IndexCatégories : Matériaux
Matériaux:Effets des hautes températures
Matériaux:Fluage
Rupture, Mécanique de laIndex. décimale : 620.112 Résumé : Introductory chapters on deformation and failure under creep conditions
Creep cavities
Creep crack growth and creep-fatigue conditionsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004718 620.112 RIE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fracture Behaviour of Polymers Type de document : texte imprimé Auteurs : KINLOCH, A., J. ; YOUNG, R., J. Editeur : Elsevier Science Publishers, Ltd Année de publication : 1983 Importance : 496 p. ISBN/ISSN/EAN : 978-0-85334-186-4 Note générale : Preface
Acknowledgements
Contents
Main notation
Main abbreviations
Introduction
References
Author index
Subject indexCatégories : Polymères
Rupture, Mécanique de laIndex. décimale : 620.192 Polymères, plastiques Résumé : Introduction
MECHANICS AND MECHANISMS
Molecular aspects
Fracture mechanics
Shear yielding
Crazing
Impact and fatigue
MATERIALS
Glassy polymers : Thermoplastics - Thermosets
Crystalline polymers
Bubbers
Toughened multiphase plasticsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004006 620.192 KIN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fracture Mechanics Criteria and Applications Type de document : texte imprimé Auteurs : GDOUTOS, E., E. Editeur : Kluwer Academic Publishers Année de publication : 1990 Importance : 313 p. ISBN/ISSN/EAN : 978-0-7923-0605-4 Note générale : Contents
Preface
Author Index
Subject IndexCatégories : Rupture, Mécanique de la Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introductory chapter
Linear elastic stress in cracked bodies
Elastic-plastic stress field in cracked bodies
Crack growth based on energy balance
J-Intergral and crack opening displacement fracture criteria
Strain energy density failure criterion
Dynamic fracture
Fatigue and environment-assisted fracture
Engineering applicationsExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00000397 620.1 GDO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00004316 620.1 GDO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fracture Mechanics. Fundamentals and Applications Type de document : texte imprimé Auteurs : ANDERSON, T., L. Editeur : CRC Press, Inc. Année de publication : 1995 Importance : 688 p. ISBN/ISSN/EAN : 978-0-8493-8974-0 Note générale : Preface
Contents
IndexCatégories : Contraintes (mécanique)
Résistance des matériaux
Rupture, Mécanique de laIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : INTRODUCTION
History and overview
FUNDAMENTAL CONCEPTS
Linear elastic fracture mechanics
Elastic-plastic fracture mechanics
Dynamic and time-depdendent fracture
MATERIAL BEHAVIOR
Fracture mechanisms in metals
Fracture mechanisms in nonmetals
APPLICATIONS
Fracture toughness testing of metals
Fracture testing of nonmetals
Application to structures
Fatigue crack propagation
Computational fracture mechanics
REFERENCE MATERIAL
Compilation of K, J,compliance and limit load solutions
Practice problemsExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00004208 620.11 AND Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00004330 620.11 AND Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026
Titre : Fracture Mechanics of Polymers Type de document : texte imprimé Auteurs : WILLIAMS, J., G. Editeur : Ellis Horwood limited Année de publication : 1987 Collection : Ellis Horwood Series in Engineering Science Importance : 302 p. ISBN/ISSN/EAN : 0-07458-0387-3 Note générale : Contents
Acknowledgements
List of Main Symbols
Index of Authors
IndexCatégories : Polymères
Rupture, Mécanique de laIndex. décimale : 620.192 Polymères, plastiques Résumé : Introduction
Energy in elastic systems
Elastic stresses around crack tips
Stress intensity factor solutions
Systems with energy dissipation
Fracture initiation
Slow crack growth and stability
Impact testing and dynamic effectsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004113 620.192 WIL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Fracture Mechanics : The Experimental Method of Caustics and the Det.-Criterion of Fracture / George A. PAPADOPOULOS
Titre : Fracture Mechanics : The Experimental Method of Caustics and the Det.-Criterion of Fracture Type de document : texte imprimé Auteurs : George A. PAPADOPOULOS Editeur : Springer Verlag Année de publication : 1993 Importance : 285 p. ISBN/ISSN/EAN : 978-0-387-19768-5 Note générale : Preface
Contents
Symbols
Introduction
References
Subject indexCatégories : Rupture, Mécanique de la Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : THE EXPERIMENTAL METHOD OF CAUSTICS
Theory of cracks
The optical method of static caustics
The optical method of dynamic caustics
THE DET.-CRITERION OF FRACTURE
The elastic strain energy density
Det.-criterion of fracture
Application of the det.-criterion in plane crack problems
Experimental det.-criterion of fractureExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003483 620.1 PAP Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fracture Micromechanics of Polymer Materials Type de document : texte imprimé Auteurs : KUKSENKO, V., S. ; TAMUZS, V., P. Editeur : Martinus Nijhoff Publishers Année de publication : 1981 Importance : 311 p. ISBN/ISSN/EAN : 978-90-247-2557-1 Note générale : Contents
Foreword
Prefaces
References
IndexCatégories : Matières plastiques
Rupture, Mécanique de laIndex. décimale : 620.192 Polymères, plastiques Résumé : Changes in the mechanical properties of polymer and composite materials during the fatigue process
The observations of continuum ruptures in polymers under load
Regularities of submicrocrack origination in loaded polymers
Structural conditions for submicrocrack generation
Molecular mechanism of submicrocrack generation
Localization of the fracture process
A statistical model of the fracture of polymer materials
Theoary of scattered fracture at the complex stress state
Fracture of polymer and composite materials during high speed tension
Analysis of the temperature field during vibrational loading with consideration given to scattered damageExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004152 620.192 KUS Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fracture of Brittle Solids Type de document : texte imprimé Auteurs : Brian LAWN Editeur : Cambridge : Cambridge Univeristy Press Année de publication : 1993 Collection : Cambridge Solid State Science Series Importance : 378 p. ISBN/ISSN/EAN : 978-0-521-40972-8 Note générale : Contents
Preface
Glossary of symbols and abbreviations
References and reading list
IndexCatégories : Matériaux
Matériaux:Fragilité
Rupture, Mécanique de laIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : The Griffith concept
Continuum aspects of crack propagation I : linear elastic crack-tip field
Continuum aspects of crack propagation II : nonlinear crack-tip field
Unstable crack propagation : dynamic fracture
Chemical processes in crack propagation : kinetic fracture
Atomic aspects of fracture
Microstructure and toughness
Indentation fracture
Crack initiation : flaws
Strength and reliabilityExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00006274 620.11 LAW Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fracture of Composites Type de document : texte imprimé Auteurs : E. ARMANIOS, Éditeur scientifique Editeur : Trans Tech Publications, Ltd Année de publication : 1996 Importance : 600 p. ISBN/ISSN/EAN : 978-0-87849-725-6 Note générale : Preface
Table of Contents
Author Index
Keyword IndexCatégories : Composites
Composites:RuptureIndex. décimale : 620.19 Autres matériaux Résumé : Analytical modeling
Computational methods
Damage mechanisms and failure prediction
Fracture characterization and notch effect
Delamination buckling and compressive loading
Toughened composites, impact and applicationsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004564 620.19 ARM Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fractured Porous Media Type de document : texte imprimé Auteurs : Pierre M. ADLER, Auteur ; Jean-François THOVERT, Auteur ; Valeri MOURZENKO, Auteur Editeur : Oxford University Press Année de publication : 2013 Importance : 175 p. ISBN/ISSN/EAN : 978-0-19-966651-5 Note générale : Preface
Contents
Introduction
Notation
References
IndexLangues : Français (fre) Catégories : Milieux poreux
Transport, Théorie duIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Introduction
The Geometry of a Single Fracture
The Geometry of Fracture Networks
Transport in a Single Fracture
Transport in a Fracture Networks
Transport in a Fractured Porous Medium
Two-Phase Flow Through Fractured Porous Media
Concluding RemarksExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00009553 620.11 ADL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fragilité et fragilisation des métaux et alliages Type de document : texte imprimé Auteurs : D. ADENIS, Auteur ; P. BLANCHARD, Auteur Editeur : Dunod Année de publication : 1963 Importance : 207 p. Note générale : Préface
Avant-propos
Table des matières
Bibliographie
Catégories : Matériaux:Fatigue
Matériaux:Fragilité
Métaux:Fragilisation par l'hydrogèneIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Fragilités causées par des constituants interstitiels. Fragilité intergranulaire
Fragilité à basse température et au revenu des aciers. Fragilités des aciers inoxydables
Etude théorique de la fragilité
Facteurs fragilisants de nature mécanique
Méthodes d'étude de la fragilité
ConclusionsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00011012 620.11 ADE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Friction and Wear of Polymer Composites Type de document : texte imprimé Auteurs : Klaus FRIEDRICH Editeur : Elsevier Science Publishers, Ltd Année de publication : 1986 Collection : Composite Materials Series num. 1 Importance : 465 p. ISBN/ISSN/EAN : 978-0-444-42524-9 Note générale : Preface
Contents
Author Index
Subject IndexCatégories : Composites polymères
FrottementIndex. décimale : 620.192 Polymères, plastiques Résumé : Introduction to friction and wear
Interfacial friction of polymer composites. General fundamental principles
Friction and wear of materials with heterogeneous microstructures
Tribological properties of selected polymeric matrix composites against steel surfaces
Effects of various fillers on the friction and wear of PTFE-based composites
Friction and wear of metal matrix - graphite fiber composites
Friction and wear performance of unidirectionally oriented glass, carbon, aramid and stainless steel fiber-reinforced plastics
Wear of reinforced polymers by different abrasive counterparts
Mild wear of rubber-based compounds
The wear and friction of commercial polymers and composites
Composites for aerospace dry bearing applications
Self-lubricating composites for extreme environmental conditionsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004179 620.192 FRI Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fundamental Principles of Fiber Reinforced Composites Type de document : texte imprimé Auteurs : ASHBEE, Ken, H., G. Editeur : Technomic Publishing Company, Inc. Année de publication : 1989 Importance : 372 p. ISBN/ISSN/EAN : 978-0-87762-597-1 Note générale : Table of Contents
Foreword
Preface
Suggested Reading
IndexCatégories : Composites à fibres
Composites à fibres:Propriétés mécaniquesIndex. décimale : 620.197 Matériaux fibreux d'origine végétale et animale : textiles, papier Résumé : Specific strength and specific modulus
Materials and processing
Anisotropy of stress
Stresses in a plate arising from the presence of a hole
Anisotropy of elasticity
Elasticity of orthotropic laminates
Anisotropy of thermal expansion
Fracture and fracture mechanics
Anisotropy of strength
Environmental degradation
Joining and repair
Non-destructive evaluationExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004270 620.197 ASH Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026
Titre : Fundamentals of Creep and Creep-Rupture in Metals Type de document : texte imprimé Auteurs : Frank GAROFALO Mention d'édition : First edition Editeur : Macmillan Company, Ltd Année de publication : 1965 Collection : Macmilllan series in materials science Importance : 258 p. Note générale : Preface
Contents
Introduction
References
IndexCatégories : Matériaux
Matériaux:Fluage
Métaux
Métaux:FatigueIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Introduction
Primary and secondary creep
Stress dependence of creep
Temperature dependence of creep
Modes of deformation in creep
Creep theories
Creep ruptureExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00002348 620.11 GAR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Fundamentals of Fiber Orientation: Description, Measurement and Prediction Type de document : texte imprimé Auteurs : Charles L. III TUCKER, Auteur Editeur : Munich : Carl Hanser verlag Année de publication : 2022 Importance : 334 p. ISBN/ISSN/EAN : 978-1-56990-875-4 Note générale : Preface
Contents
Appendices
Symbols and Abbreviations
References
IndexCatégories : Composites à fibres Index. décimale : 620.192 Polymères, plastiques Résumé : Introduction
Describing Fiber Orientation and Fiber Length
Measuring Fiber Orientation and Length
Flow Orientation of Single Fibers
Flow Orientation of Groups of Fibers
Suspension Rheology and Flow-Orientation Coupling
Fiber Length Degradation during Processing
Mechanical Properties and Orientation
Current and Future Trends
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00011671 620.192 TUC Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026
Titre : Fundamentals of Fracture Mechanics Type de document : texte imprimé Auteurs : J.-F. KNOTT Mention d'édition : 2nd impression Editeur : Butterworths & Co. (Publishers), Ltd. Année de publication : 1976 Importance : 273 p. ISBN/ISSN/EAN : 978-0-408-70789-3 Note générale : Preface
Contents
Further Reading
IndexCatégories : Rupture, Mécanique de la Index. décimale : 620.11 Matériaux (propriétés, résistance) Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00006254 620.11 KNO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026
Titre : Fundamentals of Micromechanics of Solids Type de document : texte imprimé Auteurs : Jianmin QU, Auteur ; Mohammed CHERKAOUI, Auteur Editeur : John Wiley & Sons, Inc. Année de publication : 2006 Importance : 386 p. ISBN/ISSN/EAN : 978-0-471-46451-8 Note générale : Contents
Preface
Introduction
IndexLangues : Anglais (eng) Catégories : Electromécanique
Micromécanique (physique du solide)
NanostructuresIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Basic Equations of Continuum Mechanics
Eigenstrains
Inclusions and Inhomogeneities
Definitions of Effective Moduli of Heterogeneous
Bounds for Effective Moduli
Determination of Effective Moduli
Determination of the Effective Moduli - Multiinclusion Approaches
Effective Properties of Fiber-Reinforced Composite Laminates
Brittle Damage and Failure of Ingineering Composites
Mean Field Theory for Nonlinear Behavior
Nonlinear Properties of Composites Materials : Thermodynamic Approaches
Micromechanics of Martensitic Transformation in SolidsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00013141 620.1 QUJ Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Génération automatique de maillages : Applications aux méthodes d'éléments finis / Paul-Louis GEORGE
Titre : Génération automatique de maillages : Applications aux méthodes d'éléments finis Type de document : texte imprimé Auteurs : Paul-Louis GEORGE Editeur : Masson Année de publication : 1990 Collection : Recherches en Mathématiques Appliquées Importance : 339 p. ISBN/ISSN/EAN : 978-2-225-82195-0 Note générale : Table des matières
Contents
Remerciements
Introduction générale
Bibliographie
IndexCatégories : Analyse numérique
Éléments finis, Méthode desIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Description générale d'un maillage
Méthodologie générale
Ensembles primaux (données)
Méthodes manuelles et semi-automatiques
Méthodes de transport-projection
Maillage par résolution d'E.D.P.
Superposition -déformation de grilles
Méthodes de blocs
Méthodes frontales
Méthodes de Voronoï et extensions
Maillage des surfaces
Transformations de maillages
Quelques codes de maillage
ComplémentsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00000548 620.1 GEO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Génie mécanique : conception, matériaux, fabrication, applications industrielles / Jean-François MAUREL
Titre : Génie mécanique : conception, matériaux, fabrication, applications industrielles Type de document : texte imprimé Auteurs : Jean-François MAUREL, Auteur Editeur : Dunod Année de publication : 2015 Importance : 474 p. ISBN/ISSN/EAN : 978-2-10-072225-9 Note générale : Avant-propos
Sommaire
IndexCatégories : Alliages
Constructions:Calcul
Matériaux
Mécanique appliquéeIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Conception
Matériaux métalliques
Fabrication
Machines
Appareils à pression
Tuyauterie
Charpente
LevageExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00011055 620.1 MAU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00011049 620.1 MAU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026
Titre : Les géomatériaux : théories, expériences et modèles Type de document : texte imprimé Auteurs : Félix DARVE ; Pierre-Yves HICHER ; Jean-Marie REYNOUARD Editeur : Hermès Science Publications Année de publication : 1995 Collection : Etudes en mécanique des matériaux et des structures Importance : 208 p. ISBN/ISSN/EAN : 978-2-86601-451-3 Note générale : Ill., schémas, graph., photos.
Table des matières.
Préface.
Avant-propos.
Introduction.
Liste des sigles utilisés.
Listes des auteurs.
Bibliographie.Catégories : Composites
Rupture, Mécanique de laIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Techniques expérimentales et propriétés mécaniques des geomatériaux.
La modélisation du comportement des géomatériaux.
Les techniques de calculs.
Modélisation numérique.Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00000138 620.11 DAR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible
Titre : Gigacycle Fatigue in Mechanical Practice Type de document : texte imprimé Auteurs : Claude BATHIAS ; PARIS, Paul, C. Editeur : Marcel Dekker, Inc. Année de publication : 2005 Collection : Mechanical Engineering Importance : 304 p. ISBN/ISSN/EAN : 978-0-8247-2313-2 Note générale : Dedication
Contents
Preface
Acknowledgements
Table of Notation
Appendices
References
Listing of Materials Tested in Gigacycle Fatigue
IndexCatégories : Matériaux
Matériaux:Fatigue
Rupture, Mécanique de laIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Introduction
Ultrasonic concepts
Testing machines and their performance
S-N curve and fatigue strength
Crack growth and threshold
Frequency and environmental effects
Microstructural aspects of damage to materials in the gigacycle regimeExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004324 620.11 BAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible