A partir de cette page vous pouvez :
Retourner au premier écran avec les étagères virtuelles... |
Détail de l'indexation
620.1 : Mécanique de l'ingénieur (mécanique appliquée) et matériaux

























Ouvrages de la bibliothèque en indexation 620.1


50 Years of Advanced Materials or " Back to the Future " : Proceedings of the 15th International European Chapter Conference of the Society for the Advancement of Material and Process Engineering Toulouse, France, June 8-10, 1994 / Jacques HOGNAT
Titre : 50 Years of Advanced Materials or " Back to the Future " : Proceedings of the 15th International European Chapter Conference of the Society for the Advancement of Material and Process Engineering Toulouse, France, June 8-10, 1994 Type de document : symposium Auteurs : Jacques HOGNAT ; René PINZELLI ; Eric GILLARD Editeur : SAMPE Année de publication : 1994 Importance : 400 p. ISBN/ISSN/EAN : 978-3-952047-71-2 Note générale : Foreword
Conference organising committee
Table of contentsIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : / Exemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003970 620.1 / 1994 Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Symposia [Congrès PMM et Fluides] Exclu du prêt Adhesion and Bonding in Composites / Ryutoku YOSOMIYA
Titre : Adhesion and Bonding in Composites Type de document : texte imprimé Auteurs : Ryutoku YOSOMIYA ; Kiyotake MORIMOTO ; Akio NAKAJIMA ; Yoshito IKADA ; Toshio SUZUKI Editeur : Marcel Dekker, Inc. Année de publication : 1990 Importance : 357 p. ISBN/ISSN/EAN : 978-0-8247-8149-1 Note générale : Preface
Contents
Contributors
Index
About the AuthorsCatégories : Adhésion (physique)
Collage
Composites
Surfaces (technologie)Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Interfacial characteristics of composite materials
Wettability and adhesion
Surface modification of matrix polymer for adhesion
Surface modification of matrix polymer by graft polymerization and its effects on adhesion
Modification of inorganic fillers for composite materials
Surface modification and adhesion improvement by the blend method
Adhesion of resin to metal
Bonding of ceramic to metal
Interfacial modifications and bonding of fiber-reinforced metal composite material
Interfacial effect of carbon-fiber-reinforced composite material
Interface analyses of composite materials
Interfacial strength of composite materialsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00004041 620.1 YOS Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Mechanics of Materials / Arthur Peter BORESI
Titre : Advanced Mechanics of Materials Type de document : texte imprimé Auteurs : Arthur Peter BORESI ; Richard J. SCHMIDT ; Omar M. SIDEBOTTOM Mention d'édition : Fifth edition Editeur : John Wiley & Sons, Inc. Année de publication : 1993 Importance : 811 p. ISBN/ISSN/EAN : 978-0-471-60009-1 Note générale : Preface
Contents
Appendix
Author index
Subject indexCatégories : :Matériaux:Propriétés mécaniques
Matériaux
Résistance des matériauxIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : FUNDAMENTAL CONCEPTS
Theories of stress and strain
Linear stress-strain-temperature relations
Inelastic material behavior
Applications of energy methods
CLASSICAL TOPICS IN ADVANCED MECHANICS
Torsion
Nonsymmetrical bending of straight beams
Shear center for thin-wall beam cross sections
Curved beams
Beams on elastic foundations
The thick-wall cylinder
Elastic and inelastic stability of columns
SELECTED ADVANCED TOPICS
Flat plates
Stress concentrations
Fracture mechanics
Fatigue : progressive fracture
Creep. Time-dependent deformation
Contact stresses
The finite element methodExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003634 620.1 BOR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Mechanics of Materials / Robert D. COOK
Titre : Advanced Mechanics of Materials Type de document : texte imprimé Auteurs : Robert D. COOK ; YOUNG, Warren, C. Editeur : Macmillan Publishing Company Année de publication : 1985 Importance : 539 p. ISBN/ISSN/EAN : 978-0-02-324620-3 Note générale : Preface
Contents
Answers to selected problems
Author index
Subject indexCatégories : :Matériaux:Propriétés mécaniques
Matériaux
Résistance des matériaux
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Stress, strain, energy and failure
Plane theory of elasticity
Thick-walled cylinders and spinning disks
Symmetric bending of circular plates
Elastic foundations
Thin shells of revolution
Deflections, reactions and energy methods
Torsion
Unsymmetric bending, shear center and thin-walled beams
Curved beams
Plastic collapse and limit analysis
Beam-columns, buckling and nonlinearityExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00004647 620.1 COO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Strength and Applied Elasticity : The SI version / A. C. UGURAL
Titre : Advanced Strength and Applied Elasticity : The SI version Type de document : texte imprimé Auteurs : A. C. UGURAL ; S. K. FENSTER Editeur : Edward Arnold (Publishers) Ltd Année de publication : 1981 Importance : 423 p. ISBN/ISSN/EAN : 978-0-7131-3436-0 Note générale : Contents
Preface to SI Version
Preface to the first edition
List of symbols
IndexCatégories : Elasticité Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Analysis of stress
Strain and stress-strain relations
Two-dimensional problems in elasticity
Mechanical behavior of materials
Bending of beams
Torsion and prismatic bars
Numerical methods
Axisymmetrically loaded members
Beams on elastic foundations
Energy methods
Elastic stability
Plastic behavior of solids
Introduction to plates and shellsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003688 620.1 UGU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advances in Boundary Element Methods for Fracture Mechanics / ALIABADI, M., H.
Titre : Advances in Boundary Element Methods for Fracture Mechanics Type de document : texte imprimé Auteurs : ALIABADI, M., H. ; BREBBIA, C., A. Editeur : Elsevier Science Publishers, Ltd Année de publication : 1993 Importance : 292 p. ISBN/ISSN/EAN : 978-1-85166-860-1 Note générale : Contents
Preface
ReferencesCatégories : Mécanique des solides
Résistance des matériaux
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Dual boundary element analysis of fatigue crack growth
BEM computations of elastodynamic fields in bodies containing internal, near-surface and surface-breaking cracks
The boundary element method as a tool in the design of composite laminates - theory and application
Body force method
Special crack-tip elemnts for 3D problems
Stress intensity factor weight functions for cracks in 3-D finite geometries
Application of the boundary element method to anisotropic crack problemsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003551 620.1 ALI Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advances in Crack Length Measurement / BEEVERS, C., J.
Titre : Advances in Crack Length Measurement Type de document : texte imprimé Auteurs : BEEVERS, C., J. Editeur : Engineering Materials Advisory Services Ltd, (EMAS) Année de publication : 1982 Importance : 504 p. ISBN/ISSN/EAN : 978-0-950682-04-4 Note générale : Preface
Contents
NomenclatureCatégories : :Matériaux:Fissuration
:Matériaux:Fissuration:Mesure
Matériaux
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Direct observations
d.c. potential difference
a.c. potential difference
Automated methods
Compliance techniques
Acoustic methodsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003939 620.1 BEE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advances in Fracture Research. Proceedings of the 5th International Conference on Fracture (ICF5), Cannes, France, 29 March-3April, 1981 vol. 4 / D. FRANCOIS
Titre : Advances in Fracture Research. Proceedings of the 5th International Conference on Fracture (ICF5), Cannes, France, 29 March-3April, 1981 vol. 4 Type de document : symposium Auteurs : D. FRANCOIS Editeur : Pergamon Press, Ltd Année de publication : 1981 Importance : pp. 1421-2057 Note générale : Foreword
ContentsCatégories : :Matériaux:Fatigue
:Matériaux:Fluage
Matériaux
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : / Exemplaires
Code-barres Cote Support Localisation Section Disponibilité B00007670 620.1 / 1981 Ouvrage BIBLIOTHÈQUE - ACCÈS RÉSERVÉ Symposia [Congrès PMM et Fluides] Exclu du prêt An Introduction to the Finite Method / Junuthula Narasimha REDDY
Titre : An Introduction to the Finite Method Type de document : texte imprimé Auteurs : Junuthula Narasimha REDDY Editeur : McGraw-Hill Book Company, Inc. Année de publication : 1984 Collection : Mathematics and Statistics Series Importance : 495 p. ISBN/ISSN/EAN : 978-0-07-051346-4 Note générale : Contents
Preface
Introduction
IndexCatégories : Éléments finis, Méthode des Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
Variational formulation and approximation
Finite-element analysis of one-dimensional problems
Finite-element analysis of two-dimensional problems
Prelude to advanced topicsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00005021 620.1 RED Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Applied Finite Element Analysis / Larry J. SEGERLING
Titre : Applied Finite Element Analysis Type de document : texte imprimé Auteurs : Larry J. SEGERLING Mention d'édition : Second edition Editeur : John Wiley & Sons, Inc. Année de publication : 1984 Importance : 427 p. ISBN/ISSN/EAN : 978-0-471-80662-2 Note générale : Preface
Contents
Introduction
References
Appendix
IndexCatégories : Éléments finis, Méthode des Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : BASIC CONCEPTS
Introduction
one-dimensional linear element
A finite element example
Element matrices : Galerkin formulation
Two-dimensional elements
Coordinate systems
FIELD PROBLEMS
Two-dimensional field equation
Torsion of noncircular sections
Derivative boundary conditions : point sources and sinks
Irrotational flow
Heat transfer by conduction and convection
Acoustical vibrations
Axisymmetric field problems
Time-dependent field problems : theoretical considerations
Time-dependent field problems : practical considerations
Computer program for two-dimensional field problems
STRUCTURAL AND SOLID MECHANICS
The axial force member
Element matrices ; protential energy formulations
The truss element
A beam element
A plane frame element
Theory of elasticity
Two-dimensional elasticity
Axisymmetric elasticity
Coputer programs for structural and solid mechanics
LINEAR AND QUADRATIC ELEMENTS
Element shape functions
Element matrices
Isoparametric computer programsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00006121 620.1 SEG Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Une approche simple du calcul des structures par la méthodes des éléments finis / Daniel GAY
Titre : Une approche simple du calcul des structures par la méthodes des éléments finis Type de document : texte imprimé Auteurs : Daniel GAY ; Jacques GAMBELIN Editeur : Hermès Science Publications Année de publication : 1989 Importance : 65 p. ISBN/ISSN/EAN : 978-2-86601-197-0 Note générale : Table des matières
Avant-propos
Annexe
BibliographieCatégories : Calcul des structures
Constructions, Théorie des
Éléments finis, Méthode desIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Les principes de la méthode des éléments finis en calcul des structures
Matrice de souplesse
Matrice de raideur
Quelques éléments types
Assemblage des éléments
Conditions d'appui
Application de la méthode avec le logiciel ELEMFIN
Caractéristiques de logiciel
Applications traitéesExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00000495 620.1 GAY Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible A Brief Course on the Theory of Buckling / Mark KACHANOV
Titre : A Brief Course on the Theory of Buckling Type de document : texte imprimé Auteurs : Mark KACHANOV Editeur : Solids Mechanics Division Année de publication : 1981 Importance : 100 p. ISBN/ISSN/EAN : 978-0-88898-031-1 Note générale : Contents
Author's preface
Editor's preface
Introduction
References
NotationsCatégories : Flambage (mécanique) Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
Theory of thin rods
Stability of thin curved elastic rods
Stability of elastic-plastic equilibrium
Buckcling under creep conditions
Application of the theory of thin curved rods to some problems of the buckling of shells and platesExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003625 620.1 KAC Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Buckling Thin-Walled Rods / Mark KACHANOV
Titre : Buckling Thin-Walled Rods Type de document : texte imprimé Auteurs : Mark KACHANOV ; H. H. E. LEIPHOLZ Editeur : Solids Mechanics Division Année de publication : 1983 Importance : 64 p. ISBN/ISSN/EAN : 978-0-88898-044-1 Note générale : Contents
Preface
References
NotationsCatégories : Flambage (mécanique)
Structures à parois mincesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Torsion and bending of thin-walled elastic rods
Buckling of thin walled elastic rods
Plastic buckling of thin-walled rodsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003624 620.1 KAC Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Le calcul des structures par éléments finis / Hervé DEBAECKER
Titre : Le calcul des structures par éléments finis Type de document : texte imprimé Auteurs : Hervé DEBAECKER Editeur : Hermès Science Publications Année de publication : 1988 Collection : Technologies de pointe num. 6 Importance : 60 p. ISBN/ISSN/EAN : 978-2-86601-141-3 Note générale : Table des matières
Préambule
BibliographieCatégories : Calcul des structures
Constructions, Théorie des
Éléments finis, Méthode des
Résistance des matériauxIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction. Contexte historique et technique
La méthode des éléments finis - Principes de base
Logiciels et techniques d'accompagnement
Que fait-on avec les éléments finis?
ConclusionExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00000470 620.1 DEB Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00003555 624.17 DEB Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible La chimie des surfaces / Jacques OUDAR
Titre : La chimie des surfaces Type de document : texte imprimé Auteurs : Jacques OUDAR Editeur : Presses Universitaires de France (PUF) Année de publication : 1973 Importance : 171 p. Note générale : Introduction
Table des matières
BibliographieCatégories : Chimie des surfaces Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : ADSORPTION CHIMIQUE DES GAZ SUR LES METAUX
La surface métallique
Méthodes récentes d'étude de l'adsorption
Adsorption physique et adsorption chimique
Adsorption réversible
Chaleur d'adsorption
Cinétique d'adsorption et de désorption
Structure des couches d'adsorption, phénomène de reconstruction
Influence de l'adsorption sur l'énergie superficielle
Adsorption et catalyse hétérogène
OXYDATION DES METAUX
Généralités
Processus de nucléation et de croissance de l'oxyde
Croissance des films minces
Epitaxie des couches d'oxyde
Oxydation à haute température
Adhésion et plasticité des couches d'oxyde
Oxydation des alliagesExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003918 620.1 OUD Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Comportement des structures dans le domaine plastique / ALbert LORIN
Titre : Comportement des structures dans le domaine plastique Type de document : texte imprimé Auteurs : ALbert LORIN Editeur : Eyrolles Année de publication : 1978 Importance : 228 p. Note générale : Table des matières
BibliographieCatégories : Comportement
PlastiquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Considérations préliminaires
Etude des déformations - Les conditions de plasticité
Plastification des éléments d'une structure réalisée en un matériau assimilable à un corps élasto-plastique
Adaptation d'une structure composée de barres et de poutres réalisées en un matériel élasto-plastique parfaits
Potentiel élastique et travail de déformation plastique. La fonction de Colonnetti. Les théorèmes de Colonnetti
Méthodes forfaitaires de calcul du coefficient de charge ultime
Aperçu sur les méthodes de calcul des structures en plasticité dans le domaine de validité des calculs du premier ordre
Un exemple simple traité en élasto-plastique et en rigide plastiqueExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00004249 620.1 LOR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Composite Design : Thrid Edition / TSAI, Stephen, W.
Titre : Composite Design : Thrid Edition Type de document : texte imprimé Auteurs : TSAI, Stephen, W. Mention d'édition : 3rd edition Editeur : Think Composites Année de publication : 1987 Importance : n. p. ISBN/ISSN/EAN : 978-0-961809-00-3 Note générale : List of Contributors
Prefaces
Table of Contents
Glossary
Appendices
Subject IndexCatégories : Composites Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
Notations and symbols
Generalized Hooke's law
Plane stress and plane strain
Stress and strain transformations
Ply stiffness
In-plane stiffness of symmetric laminates
Flexural stiffness of symmetric laminates
Stiffness of unsymmetric laminates
Micromechanics
Failure criteria
Design limit and ultimate strengths of laminates
Principal stress design
Laminate design by ranking
Residual stresses and strains
Environmental effects
Hygothermal effects
Bolted joints
Fatigue behavior
Notched strength
Test methods
Interlaminar stresses
Pressure vessels
Buckling of sandwich/stiffened panels
Manual for GENLAM
Manual for LAMRANK
Spreadsheet analysis of micro-macromechanics
International outlines
GlossaryExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00004044 620.1 TSA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Composite Repairs : SAMPE Mongraph No. 2 / Charles HAMERMESH
Titre : Composite Repairs : SAMPE Mongraph No. 2 Type de document : texte imprimé Auteurs : Charles HAMERMESH Editeur : SAMPE Année de publication : 1991 Importance : 128 p. ISBN/ISSN/EAN : 978-0-938994-59-6 Note générale : Foreword
Introduction
Table of Contents
IndexCatégories : :Composites:Réparations
CompositesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Foreword
Dedication
Introduction
Preparing Composites for Repair
Equipment for Composite Repair
Material for Repair of Thermoset Composites
Repair of Metal Structures by Use of Composites
Repair of Thermoplastic Composites
A Case History of Repair
An Expert System for Battle Damage RepairExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00000507 620.1 HAM Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Computation of Singular Solutions in Elliptic Problems and Elasticity : 5. / D. LEGUILLON
Titre : Computation of Singular Solutions in Elliptic Problems and Elasticity : 5. Type de document : texte imprimé Auteurs : D. LEGUILLON ; Enrique SANCHEZ-PALENCIA Editeur : Masson Année de publication : 1987 Collection : Recherches en Mathématiques Appliquées Importance : 200 p. ISBN/ISSN/EAN : 978-2-225-81217-0 Note générale : Foreword
Contents
Introduction
References
IndexCatégories : Elasticité
Equations différentielles elliptiques
Singularités (mathématiques)Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
Examples of separation of variables and applications
Laplace equation in two-dimensional problems
Regularity theory for elliptic problems
Transmission problem for an elliptic equation
Elasticity problems in two independent variables
Three-dimensional problems with edges
Slightly perturbed corners
Composite plates in traction
Miscellaneous comments and open problemsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003702 620.1 LEG Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00003703 620.1 LEG Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Computational Methods in Elasticity and Plasticity : Solids and Porous Media / A. ANANDARAJAH
Titre : Computational Methods in Elasticity and Plasticity : Solids and Porous Media Type de document : texte imprimé Auteurs : A. ANANDARAJAH, Auteur Editeur : Springer Verlag Année de publication : 2010 Importance : 653 p. ISBN/ISSN/EAN : 978-1-441-96378-9 Note générale : Preface
Contents
Introduction
References
IndexCatégories : Elasticité
Éléments finis, Méthode des
PlasticitéIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction
Mathematical Foundations
Governing Equations in Solid Mechanics
Elastic Constitutive Laws
Finite Element Analysis of Solids and Structures
Governing Equations in Porous Media
Finite Element Analysis of Porous Media
Methods of Nonlinear Analysis
Theory of Rate-Independent Elasto-Plasticity
Methods of Integrating Elasto-Plastic Constitutive Equations
The Von Mises Model and its Integration
The Modified Cam-Clay Model and its Integration
The Drucker-Prager Model and its Integration
The Sliding-Rolling Granular Model and its Integration
An Anisotropic Bounding Surface Model and its IntegrationExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00010352 620.1 ANA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Computational Methods in Mechanics : 2., Computational Methods in the Mechanics of Fracture / ATLURI, Satya, N.
Titre : Computational Methods in Mechanics : 2., Computational Methods in the Mechanics of Fracture Type de document : texte imprimé Auteurs : ATLURI, Satya, N. Editeur : Elsevier Science Publishers, Ltd Année de publication : 1986 Collection : Mechanics and mathematical methods Importance : 414 p. ISBN/ISSN/EAN : 978-0-444-87955-4 Note générale : Preface
Contents
Author IndexCatégories : :Matériaux:Fatigue
Contraintes (mécanique)
MatériauxIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Fracture : Mechanics or Art ?
Linear Elastic Fracture Mechanics
Elastic-plastic Fracture (Quasi-static)
Dynamic Crack Propagation in Solids
Energetic Approaches and Path-independent Integrals in Fracture Mechanics
Computational Methods for Plane Problems of Fracture
Computational Methods for Three-dimensional Problems of Fracture
The Line Spring Model
Stress-intensity Factor Equations for Cracks in Three-dimensional Finite Bodies Subjected to Tension and Bending Loads
Computational Methods in Dynamic Fracture
Computational Methods in Elastic-plastic Fracture MechanicsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00004149 620.1 ATL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible A Concise Introduction to Elastic Solids : An Overview of the Mechanics of Elastic Materials and Structures / Carl, T. HERAKOVICH
Titre : A Concise Introduction to Elastic Solids : An Overview of the Mechanics of Elastic Materials and Structures Type de document : texte imprimé Auteurs : Carl, T. HERAKOVICH, Auteur Année de publication : 2017 Importance : 131 p. ISBN/ISSN/EAN : 978-3-319-45601-0 Note générale : Preface
Acknowledgements
Contents
About the Author
Appendix
IndexCatégories : :Matériaux:Propriétés thermiques
Composites à fibres
Contraintes (mécanique)
Elasticité
Plaques et coques élastiquesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Mechanics of Solids
Stress
Strain
Constitutive Equations
Equilibrium
Axial Loading
Torsion of Cylindrical Bars
Beam bending
Beam Subjected to Transverse Loading
Beam Deflections
Thermal Effects
Stability
Thin-Walled Pressure Vessels
Plates and Shells
Computational Mechanics
Fibrous Composite Materials
Exemplaires
Code-barres Cote Support Localisation Section Disponibilité B00014342 620.1 CON Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/06/2023 Continuum Damage Mechanics Theory and Applications / Dusan KRAJCINOVIC
Titre : Continuum Damage Mechanics Theory and Applications Type de document : texte imprimé Auteurs : Dusan KRAJCINOVIC ; Jean LEMAITRE Editeur : Springer Verlag Année de publication : 1987 Collection : International centre for mechanical sciences num. 295 Importance : 294 p. ISBN/ISSN/EAN : 978-0-387-82011-8 Note générale : Preface
Contents
Introduction and general overview
Bibliography
AcknowledementsCatégories : Milieux continus, Mécanique des
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction and Identification of Damage Kinetic Constitutive Equations
Anisotropic Aspects of Material Damage and Application of Continuum Damage Mechanics
Micromechanics of the Damage Processes
Micromechanical Basis of Phenomenological Models
Bounding Methods and Applications
Continuous Damage of Brittle SolidsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003511 620.1 KRA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 20/09/2023 Contributions to the Theory of Aircraft Structures / A. VAN DER NEUT
Titre : Contributions to the Theory of Aircraft Structures Type de document : texte imprimé Auteurs : A. VAN DER NEUT Editeur : Delft University Press Année de publication : 1972 Importance : 440 p. Note générale : Preface
Contents
Biographical note
ReferencesCatégories : Structures
Structures à parois mincesIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : An appraisal of van der Neut's scientific work
Compression panels. An alternative language
Discussion of the mission analysis criterion for the definition of structural design loads
Structural safety of aircrafts
Some developments in structural airworthness requirements
Dynamic aspects of Fokker F-28 aircraft design
The application of the finite element displacement method to problems of elastoplastic deformation
On the diffusion of a load from a semi-infinite stringer bonded to a sheet
Stress concentration around holes in plates and shells
The bursting speed of a symmetrical conical diskwith radial holes
On the theory of multilayer shells
Stresses in a circular cylindrical shell with arbitrary holes
A general theory of isotensoid pressure vessels
Closed form solution to the semi-infinite cylindrical shell problem
Buckling of circular cylindrical shells under axial compression
The influence of production imperfections on design of optimum structures
Onthe perturbation method in the stability analysis of continuous systems
Optimum design of circular sandwich plates
On the transition from axisymmetric to multilobed creep buckling
Steady state equations of motion, equilibrium shape and stability derivatives of elastic airplanes evaluated with finite element methods
Buckling of integrally stiffenend cylindrical shells - A review of experiment and theory
Rationalization of anisotropic buckling problems
Brittle fracture under dynamic loading conditions
Calculation of potential flow about aerofoils using approximation by splines
On frequency shifting by elementary modifications of inertia and stiffness
Fatigue of lugsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003659 620.1 NEU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Corrosion Mechanisms in Theory and Practice / P. MARCUS
Titre : Corrosion Mechanisms in Theory and Practice Type de document : texte imprimé Auteurs : P. MARCUS ; Jacques OUDAR Editeur : Marcel Dekker, Inc. Année de publication : 1995 Importance : 641 p. ISBN/ISSN/EAN : 978-0-8247-9592-4 Note générale : Preface
Contents
Contributors
IndexCatégories : Anticorrosifs
CorrosionIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Introduction to surface reactions : electrochemical basis of corrosion
Introduction to surface reactions : adsorption from gas phase
Anodic dissolution
Thin oxide film formation on metals
Growth and stability of passive films
Passivity of austenitic stainless steels
Mechanisms of pitting corrosion
Sulfur-assisted corrosion mechanisms and the role of alloyed elements
Further insights on the pitting corrosion of stainless steels
Stress-corrosion cracking mechanisms
Corrosion inhibition by adsorbed oragnic monolayers
Atmospheric corrosion
Microbially influenced corrosion
Corrosion in nuclear systems : environmentally assisted cracking in light water reactors
Corrosion in microelctronic and magnetic storage devices
Inorganic and organic coatingsExemplaires
Code-barres Cote Support Localisation Section Disponibilité B00003911 620.1 MAR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible