BIBLIOTHÈQUE - ACCÈS LIBRE
600 - Sciences appliquées - Technologie > Techniques (Sciences appliquées) > Art de l'ingénieur et activités connexes > Généralités
Introduction au matériaux polymères / Rémi DETERRE
Titre : Introduction au matériaux polymères Type de document : texte imprimé Auteurs : Rémi DETERRE ; Gérard FROYER Editeur : Paris : Lavoisier Hermès Année de publication : 1997 Collection : Technique et Documentation Importance : 215 p. ISBN/ISSN/EAN : 978-2-7430-0171-1 Note générale : Préface
Remerciements
Table des matières
Bibliographie
IndexCatégories : Macromolécules
Matériaux
PolymèresIndex. décimale : 620.192 Polymères, plastiques Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00006137 620.192 DET Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 B00006352 620.192 DET Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction à la mécanique des matériaux et des structures / Michel DUPEUX
Titre : Introduction à la mécanique des matériaux et des structures : cours et exercices corrigés Type de document : texte imprimé Auteurs : Michel DUPEUX, Auteur Editeur : Dunod Année de publication : 2009 Importance : 292 p. ISBN/ISSN/EAN : 978-2-10-053023-6 Note générale : Avant-propos
Table des matières
Annexes
Langues : Français (fre) Catégories : Constructions, Théorie des
Matériaux
Résistance des matériaux
Science des matériauxIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : INTRODUCTION
L'essai de traction
Quelques autres essais mécaniques courants
Chargement mécanique d'un solide
ELEMENTS DE MECANIQUE DES MILIEUX CONTINUS
Etat de contrainte
Etat de déformation en un point
Lois de comportement - élasticité
Lois de comportement - plasticité
Choix d'un critère de résistance
APPLICATIONS
Torsion des poutres droites
Flexion des poutres droites
Flambement d'une poutre droite
applications de l'énergie de déformation élastique
Mécanique des défauts dans les solides
Introduction à la méthode des éléments finis
ANNEXES
Mécanique : grandeurs, unités légales et symboles (d'après NF X 02 203)
Tableaux de conversion d'unités
Propriétés mécaniques de quelques matériaux à température ambiante
Rappels de mathématiquesExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00008666 620.11 DUP Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 B00009083 620.11 DUP Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction à la mécanique non linéaire / Jean-Charles CRAVEUR
Titre : Introduction à la mécanique non linéaire : calcul des structures par éléments finis ; cours et exercices corrigés Type de document : texte imprimé Auteurs : Jean-Charles CRAVEUR, Auteur ; Philippe JETTEUR, Auteur Editeur : Dunod Année de publication : 2010 Importance : 349 p. ISBN/ISSN/EAN : 978-2-10-054603-9 Note générale : Table des matières
Avant-propos
Index alphabétiqueLangues : Français (fre) Catégories : Cinématique
Déformations (mécanique)
Mécanique non linéaire
PlasticitéIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Contraintes
Déformations
Lois de comportement
Mécanique linéaire
Mécanique non linéaire
Approche cinématique
Contraintes en non linéaire
Forces internes et matrice tangente
Méthodes numériques
Stabilité, flambage
Plasticité
Contact
Dynamique non linéaire
Divers
Hyperélasticité
Exercices stabilité, flambage
Exercices plasticité
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00008718 620.1 CRA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction à la mécanique des polymères / Christian G'SELL
Titre : Introduction à la mécanique des polymères Type de document : texte imprimé Auteurs : Christian G'SELL, Éditeur scientifique ; Jean-Marc HAUDIN, Éditeur scientifique Editeur : Institut National Polytechnique de Lorraine (INPL) Année de publication : 1995 Importance : 430 p. ISBN/ISSN/EAN : 978-2-905267-22-1 Note générale : Table des matières
Préfaces
Avant-propos des éditeursCatégories : Mécanique
Polymères
Polymères:Propriétés mécaniquesIndex. décimale : 620.192 Polymères, plastiques Résumé : Mise à niveau en mécanique du solide et en science des polymères
Comportement mécanique macrosopique
Mécanismes microscopiques de déformation
Instabilités, endommagement et ruineExemplaires (4)
Code-barres Cote Support Localisation Section Disponibilité B00004105 620.192 GSE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00005715 620.192 GSE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 29/08/2024 B00006296 620.192 GSE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00006131 620.192 GSE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction à la mécanique de la rupture / René LABBENS
Titre : Introduction à la mécanique de la rupture Type de document : texte imprimé Auteurs : René LABBENS ; George, R. IRWIN, Préfacier, etc. Editeur : Editions Pluralis Année de publication : 1980 Importance : 244 p. ISBN/ISSN/EAN : 978-2-86216-002-3 Note générale : Table des matières.
Préface.
Introduction.
Bibliographie.
Photo noir et blanc.
Annexe.Catégories : Contraintes (mécanique)
Matériaux
Matériaux:Fatigue
Résistance des matériaux
Rupture, Mécanique de laIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Etude energétique de la rupture brutale.
Théorie linéaire - champs de contrainte et de déplacement.
Calcul des facteurs d'intensité de contrainte.
Variations d'énergie potentielle et intégrales de contour.
Critères d'instabilité en direction et en intensité.
Déformation plastique près du front de fissure.
Croissance stable des fissures.
Problèmes dynamiques.
Mesure de ténacité.
Prévention industrielle de la rupture.Exemplaires (5)
Code-barres Cote Support Localisation Section Disponibilité B00001103 620.11 LAB Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00000476 620.11 LAB Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00000505 620.11 LAB Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00004681 620.11 LAB Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00005725 620.11 LAB Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction à la métallurgie générale / Jacques LEVY
Titre : Introduction à la métallurgie générale Type de document : texte imprimé Auteurs : Jacques LEVY Editeur : Les Presses de l'Ecole des Mines Année de publication : 1999 Collection : Sciences de la matière : cours Importance : 180 p. ISBN/ISSN/EAN : 978-2-911762-14-7 Note générale : Sommaire.
Annexes.
Avertissement.
Ouvrages didactiques.
Ouvrages plus techniques.
Préambule.
Glossaire.Catégories : Métallurgie Index. décimale : 620.16 Métaux et leurs alliages Résumé : La composition chimique.
La structure des matériaux métalliques.
Les transformations de phases.
Les propriétés mécaniques des métaux et alliages.Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00001571 620.16 LEV Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction à la micromécanique des milieux poreux / Luc DORMIEUX
Titre : Introduction à la micromécanique des milieux poreux Type de document : texte imprimé Auteurs : Luc DORMIEUX, Auteur ; Emmanuel BOURGEOIS, Auteur Editeur : Presses de l'Ecole Nationale des Ponts et Chaussées Année de publication : 2002 Importance : 175 p. ISBN/ISSN/EAN : 978-2-85978-364-8 Note générale : Table des matières
Avant-propos
Principales notations
IndexCatégories : Elasticité
Matériaux poreux:Propriétés mécaniques
Micromécanique (ingénierie)
Micromécanique (physique du solide)Index. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Description macroscopique des milieux poreux
Techniques de changement d'échelle
Transport darcéen
Transport diffusif d'une composante du fluide
Comportement poroélastique linéaire
Problèmes d'évolution en poroélasticité
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00014190 620.11 DOR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction à la physique des polymères / Serge ETIENNE
Titre : Introduction à la physique des polymères Type de document : texte imprimé Auteurs : Serge ETIENNE ; Laurent DAVID Editeur : Dunod Année de publication : 2002 Collection : Sciences Sup. Importance : 312 p. ISBN/ISSN/EAN : 978-2-10-005835-8 Note générale : Préface
Table des matières
Annexes
IndexCatégories : Polymères
Polymères:Propriétés optiques
Polymères:Propriétés thermiques
Polymères:Rhéologie
Polymères:Viscosité
Science des matériauxIndex. décimale : 620.192 Polymères, plastiques Résumé : Introduction aux matériaux polymères. Notion de macromolécule
Cohésion à l'état solide et modules élastiques des polymères à l'état vitreux et à l'état cristallin
Modules d'élasticité à l'état élastomère : théories statique et moléculaire de l'élasticité entropique
La transition vitreuse
Viscoélasticité linéaire
Physique des polymères semi-cristallins
Propriétés électriques et optiques
Diffraction, diffusion et absorption de rayonnement par les polymères : application à la caractérisation microstructuraleExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00006283 620.192 ETI Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 16/09/2024 B00006364 620.192 ETI Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction aux plans d'expériences : Avec applications / Jacques GOUPY
Titre : Introduction aux plans d'expériences : Avec applications Type de document : texte imprimé Auteurs : Jacques GOUPY, Auteur Mention d'édition : 5e édition Editeur : Dunod Année de publication : 2017 Importance : 401 p. ISBN/ISSN/EAN : 978-2-10-059296-8 Note générale : Table des matières
Avant-propos
Annexes
Bibliographie
Index
Liste des exemplesCatégories : Analyse de variance
Essais (technologie)
Plan d'expérience
Plans factoriels
Plans optimaux (satistique)
Qualité:ContrôleIndex. décimale : 620 Art de l'ingénieur et activités connexes Résumé : Faites connaissance avec la méthode des plans d'expériences
Votre premier plan d'expériences
Plan d'expériences pour 3 facteurs
Plans factoriels complets à 4 facteurs
Notions de statistique appliquées aux plans d'expériences
Plans factoriels fractionnaires
Exemples de plans factoriels fractionnaires
Ordre des essais
Plans pour surfaces de réponse
Plans de mélanges
Notion de plan optimal
Carrés latins et plans associés
Les plans à facteurs mixtes
Les plans en parcelles divisées ou plans split-plot
Les plans uniformes
Synthèse et conseilsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00014681 620 GOU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction aux problèmes inverses en mécanique des matériaux / H.D. BUI
Titre : Introduction aux problèmes inverses en mécanique des matériaux Type de document : texte imprimé Auteurs : H.D. BUI ; Paul GERMAIN Editeur : Eyrolles Année de publication : 1993 Collection : collection de la direction des Etudes et Recherches d'Eléctricité de France num. 83 Importance : 236 p. ISBN/ISSN/EAN : ISSN 0399-4198 Note générale : Sommaire général
Préface
Notation
Table des matières
Bibliographie
IndexCatégories : Matériaux
Matériaux:Propriétés mécaniques
MécaniqueIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Elasticité et plasticité
Rupture et endommagement
Lois de conservation
Rupture dynamique
Vibration inverse
Diffraction d'ondes élastiques
Diffraction d'ondes acoustiques
Détection photothermique
Tomographie
Microvimétrie
Indentification des matériaux
Contraintes résiduelles
Régularisation des problèmes mal posés
Problème inverse du laplacien
Contrôle optimal en mécanique
IndexExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00001440 620.11 BUI Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction to Aerospace Materials / Adrian, P. MOURITZ
Titre : Introduction to Aerospace Materials Type de document : texte imprimé Auteurs : Adrian, P. MOURITZ, Auteur Editeur : Cambridge : Woodhead Année de publication : 2012 Collection : Woodhead Publishing in materials Importance : 621 p. ISBN/ISSN/EAN : 978-1-85573-946-8 Note générale : Contents
Preface
IndexCatégories : Avions:Matériaux
Cellules (aéronautique):Fatigue
Endommagement, Mécanique de l' (milieux continus)Index. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Introduction to aerospace materials
Aerospace materials: past, present and future
Materials and material requirements for aerospace structure and engines
Strengthening of metal alloys
Mechanical and durability testing of aerospace materials
Production and casting of aerospace metals
Processing and machining of aerospace metals
Aluminium alloys for aircraft structures
Titanium alloys for aerospace structures and engines
Magnesium slloys for aerspace structures
Steel for aircraft structures
Superalloys for gas turbine engines
Polymers for aerospace structures
Manufacturing of fibre-polymer composite materials
Fibre-polymer composites for aerospace structures and engines
Metal matrix, fibre-metal and ceramic matrix composites for aerospace applications
Wood in small aircraft construction
Fracture processes of aerospace materials
Fracture toughness properties of aerospace
Fatigue of aerospace materials
Corrosion of aerospace metals
Creep of aerospace materials
Nondestructive inspection and structural health monitoring of aerospace materials
Disposal and recycling of aerospace materials
Materials selection for aerospaceExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00010500 620.11 MOU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00010353 620.11 MOU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction to Composite Materials / TSAI, Stephen, W.
Titre : Introduction to Composite Materials Type de document : texte imprimé Auteurs : TSAI, Stephen, W. ; HAHN, H., Thomas Editeur : Technomic Publishing Company, Inc. Année de publication : 1980 Importance : 457 p. ISBN/ISSN/EAN : 978-0-87762-288-8 Note générale : Contents
Appendix A : Transformation Equations
Appendix B : Unit Conversion Tables
Appendix C : General References
IndexCatégories : Composites Index. décimale : 620.19 Autres matériaux Résumé : Stiffness of unidirectional composites
Transformation of stress and strain
Off-axis stiffness of unidirectional composites
In-plane stiffness of symmetric laminates
Flexural stiffness of symmetric sandwich laminates
Properties of general laminates
Strength of composite materials
Hygrothermal behavior
MicromechanicsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004226 620.19 TSA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction to computational plasticity / Fionn DUNNE
Titre : Introduction to computational plasticity Type de document : texte imprimé Auteurs : Fionn DUNNE ; Nik PETRINIC Editeur : Oxford University Press Année de publication : 2009 Importance : 241 p. ISBN/ISSN/EAN : 978-0-19-856826-1 Note générale : Preface
Contents
Acknowledgments
Notation
Appendix
IndexCatégories : Plasticité Index. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : MICROPLASTICITY AND CONTINUUM PLASTICITY
Microplasticity
Continuum plasticity
Kinematics of large deformations and continuum mechanics
The finite element method for static and dynamic plasticity
Implicit and explicit integration of von mises plasticity
Implementation of plasticity models into finite element code
PLASTICITY MODELS
Superplasticity
Porous plasticity
Creep in an aero-engine combustor material
Cyclic plasticity, creep, and TMF
APPENDIX
Elements of tensor algebra
Fortran coding available via the OUP WebsiteExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00008301 620.11 DUN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction to Contact Mechanics / Anthony FISCHER-CRIPPS
Titre : Introduction to Contact Mechanics Type de document : texte imprimé Auteurs : Anthony FISCHER-CRIPPS, Auteur Mention d'édition : 2nd edition Editeur : Springer Verlag Année de publication : 2007 Importance : 221 p. ISBN/ISSN/EAN : 978-0-387-68187-0 Note générale : Series Preface
Preface
Contents
List of Symbols
History
IndexCatégories : Déformations (mécanique)
Indentation des matériaux
Mécanique du contactIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Mechanical Properties of Materials
Linear Elastic Fracture Mechanics
Delayed Fracture in Brittle Solids
Statistics of Brittle Fracture
Elastic Indentation Stress Fields
Elastic Contact
Hertzian Fracture
Elastic-Plastic Indentation Stress Fields
Hardness
Elastic and Elastic-Plastic Contact
Depth-Sensing Indentation Testing
Indentation Test MethodsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00012623 620.11 FIS Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction to Finite Elements in Engineering / Tirupathi CHANDRUPATLA
Titre : Introduction to Finite Elements in Engineering Type de document : texte imprimé Auteurs : Tirupathi CHANDRUPATLA ; Ashok BELEGUNDU Mention d'édition : second edition Editeur : Prentice Hall, Inc. Année de publication : 1991 Importance : 414 p. ISBN/ISSN/EAN : 978-0-13-483082-7 Note générale : Contents
Preface
Bibliography
IndexCatégories : Éléments finis, Méthode des
TechnologieIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Fundamental concepts
Matrix algebra and gaussian elimination
One-dimensional problems
Trusses
Two-dimensional problems using constant strain triangles
Axisymmetric solids subjected to axisymmetric loading
Two-dimensional isoparametric elements and numerical integration
Beams and frames
Three-dimensional problems in stress analysis
Scalar field problems
Dynamic considerations
Preprocessing and postprocessingExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003531 620.1 CHA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction to Impact Engineering / M. MACAULAY
Titre : Introduction to Impact Engineering Type de document : texte imprimé Auteurs : M. MACAULAY Editeur : Chapman and Hall, Ltd. Année de publication : 1987 Importance : 276 p. ISBN/ISSN/EAN : 978-0-412-28930-9 Note générale : Contents
preface
Bibliography
References
IndexCatégories : Impact
TechnologieIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Linear elasticity
Non-linear and time-dependent elasticity
Plasticity
Fracture
Rigid body motion
Undamped linear vibrations
Deformable bodies
Energy absorbers
Structures
Impact injury
TestingExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003813 620.11 MAC Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction to Mechanics of Materials / William F. RILEY
Titre : Introduction to Mechanics of Materials Type de document : texte imprimé Auteurs : William F. RILEY ; Loren W. ZACHARY Editeur : John Wiley & Sons, Inc. Année de publication : 1989 Importance : 747 p. ISBN/ISSN/EAN : 978-0-471-50332-3 Note générale : Preface
Contents
Symbols and abbreviations
Subject indexCatégories : Constructions, Théorie des
Résistance des matériauxIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Introduction to stress, strain and their relationships
Axial loading : applications and pressure vessels
Torsional loading
Flexural loading : stresses
Flexural loading : deflections
Statically indeterminate beams
Stress and strain transformation equations
Combined static loadings
Columns
Inelastic behavior
Energy methodsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004882 620.11 RIL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction to Physical Polymer Science / SPERLING, L., H.
Titre : Introduction to Physical Polymer Science Type de document : texte imprimé Auteurs : SPERLING, L., H., Éditeur scientifique Editeur : John Wiley & Sons, Inc. Année de publication : 1986 Importance : 439 p. ISBN/ISSN/EAN : 978-0-471-89092-8 Note générale : Preface
Contents
Values of Often-used Constants and Useful Conversion Factors
IndexCatégories : Polymères Index. décimale : 620.192 Polymères, plastiques Résumé : Introduction to polymer science
Chain structure and configuration
Molecular weights and sizes
Solution and phase behavior
The bulk state
Glass-rubber transition behavior
Rubber elasticity
Polymer viscoelasticity and flow
Mechanical behavior of polymersExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004387 620.192 SPE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction to Polymers / YOUNG, R., J.
Titre : Introduction to Polymers Type de document : texte imprimé Auteurs : YOUNG, R., J. ; LOVELL, P., A. Mention d'édition : 2nd ed. Editeur : Chapman and Hall, Ltd. Année de publication : 1991 Importance : 443 p. ISBN/ISSN/EAN : 978-0-412-30640-2 Note générale : Contents
Prefaces
Answers to Problems
IndexCatégories : Polymères Index. décimale : 620.192 Polymères, plastiques Résumé : Introduction
Synthesis
Characterization
Structure
Mechanical propertiesExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00006230 620.192 YOU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction to Reliability Engineering / E. E. LEWIS
Titre : Introduction to Reliability Engineering Type de document : texte imprimé Auteurs : E. E. LEWIS Editeur : John Wiley & Sons, Inc. Année de publication : 1987 Importance : 400 p. ISBN/ISSN/EAN : 978-0-471-85497-5 Note générale : Preface
Contents
Introduction
Answers to selected exercices
IndexCatégories : Fiabilité
Qualité
Qualité:ContrôleIndex. décimale : 620 Art de l'ingénieur et activités connexes Résumé : Introduction
Probability and sampling
Continuous random variables
Reliability and rates of failure
Reliability testing
Loads, capacity and reliability
Redundancy
Maintained systems
Failure interactions
System safety analysisExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003501 620 LEW Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction to Solid Mechanics / Irving H. SHAMES
Titre : Introduction to Solid Mechanics Type de document : texte imprimé Auteurs : Irving H. SHAMES Mention d'édition : Second edition Editeur : Prentice Hall, Inc. Année de publication : 1989 Importance : 701 p. ISBN/ISSN/EAN : 978-0-13-479957-5 Note générale : Contents
Preface
Appendix
IndexCatégories : Solides
Solides:Mécanismes de renforcementIndex. décimale : 620.17 Métaux ferreux (fer et acier) et leurs alliages Résumé : Fundamental notions
Stress
Strain
Introduction to mechanical properties of solids
One-dimensional problems
Multidimensional stress-strain relations
Plane stress
Plane strain
Failure criteria
Section forces in beams
Stresses in beams
Deflection of beams
Singularity functions
Torsion
Three-dimensional stress properties at a point
Three-dimensional strain relations at a point
Introduction to elastic stability
Energy methods : displacement methods
Energy methods : force methods
Introduction to finite elementsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003633 620.17 SHA Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction to Strengthening Mechanisms / FELBECK, David, K.
Titre : Introduction to Strengthening Mechanisms Type de document : texte imprimé Auteurs : FELBECK, David, K. Editeur : Prentice Hall, Inc. Année de publication : 1968 Importance : 146 p. Note générale : Preface
Contents
IndexCatégories : Solides
Solides:Mécanismes de renforcementIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Pure elements
Single phases
Phase diagrams
Multiple phases
Martensites and tempered martensitesExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004407 620.11 FEL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction to a Study of Mechanical Vibration / VAN SANTEN, G., W.
Titre : Introduction to a Study of Mechanical Vibration Type de document : texte imprimé Auteurs : VAN SANTEN, G., W. ; NOLTINGK, B., E. Editeur : Philip's Technical Library Année de publication : 1953 Importance : 296 p. Note générale : Foreword
Preface
Contents
Some of the more important symbols used
Bibliography for further study
Apendices
Alphabetical Subject IndexCatégories : Vibrations Index. décimale : 620.3 Vibration mécanique Résumé : Vibrations
Undamped free vibrations
Damped free vibrations
Forced vibrations
Analogies between mechanical and electrical oscillations
Degrees of freedom
The theory of isolation
Resonance curves
Propagation of vibrations
Sound and other wave phenomena
Bending vibrations in shafts
Torsional vibrations of shafts
Balancing
Damping
Some special vibration phenomena
Detrimental effects of vibrations
Principles of equipement for the measurement of vibration
Instruments for the measurement of vibrations
Some practical hints on vibration measurement
The human vibration measuring apparatusExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003756 620.3 VAN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Introduction to Texture Analysis : Macrotexture, Microtexture, and Orientation Mapping / Olaf ENGLER
Titre : Introduction to Texture Analysis : Macrotexture, Microtexture, and Orientation Mapping Type de document : texte imprimé Auteurs : Olaf ENGLER, Auteur ; V. RANDLE, Auteur Mention d'édition : 2nd ed. Editeur : CRC Press, Inc. Année de publication : 2010 Importance : 456 p. ISBN/ISSN/EAN : 978-1-4200-6365-3 Note générale : Contents
Appendices
Glossary
References
General bibliography
IndexLangues : Anglais (eng) Catégories : Matériaux:Analyse Index. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Introduction
Description of orientation
Application of diffraction to texture analysis
Macrotexture measurements
Evaluation and representation of macrotexture data
The Kikuchi diffraction pattern
Scanning electron microscopy-based techniques
Transmission electron microscopy-based techniques
Evaluation and representation of microtexture data
Orientation microscopy and orientation mapping
Crystallographic analysis of interfaces, surfaces, connectivity
Synchrotron radiation, nondiffraction techniques, and comparisons between methods.Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00009744 620.11 ENG Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Introduction to the high-temperature oxidation of metals / Neil BIRKS
Titre : Introduction to the high-temperature oxidation of metals Type de document : texte imprimé Auteurs : Neil BIRKS ; MEIER, Gerald, H. ; Fred. S. PETTIT Mention d'édition : 2nd ed. Editeur : Cambridge : Cambridge Univeristy Press Année de publication : 2009 Importance : 338 p. ISBN/ISSN/EAN : 978-0-521-48517-3 Note générale : Contents
Acknowledgements
Preface
Introduction
Appendixes
IndexCatégories : Métaux
Métaux:Effets des hautes températures
Oxydation
Oxydes métalliquesIndex. décimale : 621.16 Machines à vapeur. Turbines Résumé : Methods of investigation
Thermodynamic fundamentals
Mechanisms of oxidation
Oxidation of pure metals
Oxidation of alloys
Oxidation in oxidants other than oxygen
Reactions of metals in mixed environments
Hot corrosion
Erosion-corrosion of metals in oxiding atmospheres
Protective coatings
Atmosphere control for the protectionof metals during production processesExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00008036 620.16 BIR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026