BIBLIOTHÈQUE - ACCÈS LIBRE
600 - Sciences appliquées - Technologie > Techniques (Sciences appliquées) > Art de l'ingénieur et activités connexes > Généralités
120 exercices de mécanique élastoplastique de la rupture / Guy PLUVINAGE
Titre : 120 exercices de mécanique élastoplastique de la rupture Type de document : texte imprimé Auteurs : Guy PLUVINAGE Editeur : Toulouse : Cépaduès-Éditions Année de publication : 1997 Importance : 606 p. ISBN/ISSN/EAN : 978-2-85428-361-7 Note générale : Sommaire Catégories : Elastoplasticité
Matériaux
Matériaux:Fissuration
Mécanique appliquée
Rupture, Mécanique de laIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : / Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004331 620.11 PLU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible 3D Images of Materials Structures : Processing and Analysis / Joachim OHSER
Titre : 3D Images of Materials Structures : Processing and Analysis Type de document : texte imprimé Auteurs : Joachim OHSER, Auteur ; Katja SCHLADITZ, Auteur Editeur : Wiley-Vch Verlag Année de publication : 2009 Importance : 325 p. ISBN/ISSN/EAN : 978-3-527-31203-0 Note générale : Foreword
Contents
Preface
Conventions and Notation
Introduction
References
IndexCatégories : Fourier, Analyse de
Imagerie (technique)
Microstructure (physique)Index. décimale : 620.11 Matériaux (propriétés, résistance) Note de contenu : Preliminaries
Lattices, Adjacency of Lattice Points, and Images
Images Processing
Measurement of Intrinsic Volumes and Related Quantities
Spectral Analysis
Model-based Image Analysis
Simulation of Material Properties
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00010558 620.11 OHS Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Les aciers inoxydables / Paul LACOMBE
Titre : Les aciers inoxydables Type de document : texte imprimé Auteurs : Paul LACOMBE ; B. BAROUX ; Gérard BERANGER Catégories : Acier inoxydable Index. décimale : 620.17 Métaux ferreux (fer et acier) et leurs alliages Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00000640 620.17 LAC Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Aciers inoxydables aciers réfractaires / L. COLOMBIER
Titre : Aciers inoxydables aciers réfractaires Type de document : texte imprimé Auteurs : L. COLOMBIER ; J. HOCHMANN ; H. MALCOR, Préfacier, etc. Editeur : Dunod Année de publication : 1955 Importance : 526 p. Note générale : Préface
Table des matières
Introduction
Annexe
Index des auteurs
Table alphabétique des matièresCatégories : Acier inoxydable
Acier réfractaireIndex. décimale : 620.17 Métaux ferreux (fer et acier) et leurs alliages Résumé : ACIERS INOXYDABLES
L'influence des divers éléments d'alliage sur la structure
Propriétés générales des aciers inoxydables
Résistance à la corrosion des aciers inxoydables
Méthodes d'essais de corrosion
Action des divers miliaux corrosifs
ACIERS ET ALLIAGES REFRACTAIRES
Résistance chimique à haute température
Résistance mécanique à haute température
Propriétés des principaux aciers et alliages réfractaires
Quelques emplois particuliers
PROCEDES DE FABRICATION ET MISE EN OEUVREExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003856 620.17 COL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Les aciers non alliés suivi de Les aciers alliés / R. BENSIMON
Titre : Les aciers non alliés suivi de Les aciers alliés : Cours professé à l'Ecole nationale supérieure de l'armement et à l'Ecole nationale du Génie rural Type de document : texte imprimé Auteurs : R. BENSIMON, Auteur Editeur : Eyrolles Année de publication : 1956 Importance : 187 p. + 137 p. Note générale : Table des matières
Catégories : Acier
Aciers alliés
Fonte:Métallographie
Métaux:Trempe
Traitements de surfaceIndex. décimale : 620.17 Métaux ferreux (fer et acier) et leurs alliages Résumé : LES ACIERS NON ALLIES
Les transformations allotropiques du fer : Le diagramme fer-carbone
Classification et désignation des alliages fer-carbone
Elaboration de la fonte de première fusion
Elaboration de l'acier
Les éléments d'accompagnement du fer dans l'acier
Traitement mécaniques de l'acier en aciérie
La coulée continue de l'acier
Transformation isotherme de l'austénite hors d'équilibre
Transformation de l'austénite hors d'équilibre en refroidissement continu. La trempe de l'acier
Etude des facteurs intervenant dans la trempe de l'acier
Matériels utilisés pour la trempe de l'acier et méthodes de trempe
Modification de la martensité par chauffage. Le revenu
Trempe différée
Traitement de l'acier au revenu
La fragilité de l'acier au revenu
Le vieillissement de l'acier doux
Trempe superficielle
Cémentation
Nitruration
Carbonitruisation
Remarques sur les systèmes de contraintes préalables causés dans les pièces par les procédés de traitement hétérogène précédents et leur influence sur la tenue en fatigue
LES ACIERS ALLIES
INFLUENCE DES DIVERS ELEMENTS D'ADDITION SUR LES PROPRIETES DES ACIERS
ETUDE DES PRINCIPALES NUANCES D'ACIERS ALLIES
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00011117 620.17 BEN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Acoustic Waves : Devices, Imaging, and Analog Signal Processing / KINO, Gordon, S.
Titre : Acoustic Waves : Devices, Imaging, and Analog Signal Processing Type de document : texte imprimé Auteurs : KINO, Gordon, S. Editeur : Prentice Hall, Inc. Année de publication : 1987 Importance : 601 p. ISBN/ISSN/EAN : 978-0-13-003047-4 Note générale : Contents
Preface
Appendices
IndexCatégories : Génie acoustique
Piézoélectricité
Son:Appareils et matérielIndex. décimale : 620.2 Son et vibrations connexes. Acoustique appliquée Résumé : SOUND WAVE PROPAGATION
Introduction
Piezoelectric materials
Energy conservation in piezoelectric media
Piezoelectric transducer
Tensor notation and constitutive relations for piezoelectric and nonpiezoelectric materials
WAVES IN ISOTROPIC MEDIA
Introduction
Basic theory for waves in isotropic media
Acoustic waveguides
Interdigital transducers
Normal-mode theory and perturbation theory
WAVE PROPAGATION WITH FINITE EXCITING SOURCES
Diffraction and nonuiform excitation
Plane piston transducers
Focused transducers
Pulsed excitation of transducers
Lensless acoustic imaging
Reflection and scattering by small and large objects
TRANSVERSAL FILTERS
Introduction
Linear passive surface wave devices
Charge-transfer devices
Matched filters
FM chrip filters and chirp transform processors
Bandass filter
Convolers
Adaptive filters
Acousto-optic filtersExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004695 620.2 KIN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Acoustics. A Textbook for Engineers and Physicists : I., Fundamentals / Jerry, H. GINSBERG
Titre : Acoustics. A Textbook for Engineers and Physicists : I., Fundamentals Type de document : texte imprimé Auteurs : Jerry, H. GINSBERG, Auteur Editeur : Springer Verlag Année de publication : 2018 Importance : 576 p. ISBN/ISSN/EAN : 978-3-319-56843-0 Note générale : Preface
Acknowledgements
Contents
AppendixCatégories : Acoustique
Fréquence des oscillations
Son:MesureIndex. décimale : 620.2 Son et vibrations connexes. Acoustique appliquée Résumé : FUNDAMENTALS
Description of Sound
Plane Waves : Time Domain Solutions
Plane Waves : Frequencly-Domain Solutions
Principles and Equations for Multidimensional Phenomena
Interface Phenomena for Planar Waves
Spherical Waves and Point Sources
APPLICATIONS
Radiation from Vibrating Bodies
Radiation from a Source in a Baffle
Modal Analysis of Waveguides
Modal Analysis of Enclosures
Geometrical Acoustics
Scattering
Nonlinear Acoustic Waves
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00013134 620.2 GIN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Adhesion and Bonding in Composites / Ryutoku YOSOMIYA
Titre : Adhesion and Bonding in Composites Type de document : texte imprimé Auteurs : Ryutoku YOSOMIYA ; Kiyotake MORIMOTO ; Akio NAKAJIMA ; Yoshito IKADA ; Toshio SUZUKI Editeur : Marcel Dekker, Inc. Année de publication : 1990 Importance : 357 p. ISBN/ISSN/EAN : 978-0-8247-8149-1 Note générale : Preface
Contents
Contributors
Index
About the AuthorsCatégories : Adhésion (physique)
Collage
Composites
Surfaces (technologie)Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Interfacial characteristics of composite materials
Wettability and adhesion
Surface modification of matrix polymer for adhesion
Surface modification of matrix polymer by graft polymerization and its effects on adhesion
Modification of inorganic fillers for composite materials
Surface modification and adhesion improvement by the blend method
Adhesion of resin to metal
Bonding of ceramic to metal
Interfacial modifications and bonding of fiber-reinforced metal composite material
Interfacial effect of carbon-fiber-reinforced composite material
Interface analyses of composite materials
Interfacial strength of composite materialsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004041 620.1 YOS Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Ceramic Matrix Composites. Design Approaches, Testing and Life Prediction Methods / GENERAZIO, Edward, R.
Titre : Advanced Ceramic Matrix Composites. Design Approaches, Testing and Life Prediction Methods Type de document : texte imprimé Auteurs : GENERAZIO, Edward, R. Editeur : Technomic Publishing Company, Inc. Année de publication : 1996 Importance : 226 p. ISBN/ISSN/EAN : 978-1-56676-334-9 Note générale : Table of contents
PrefaceCatégories : Composites à matrice céramique Index. décimale : 620.14 Céramique et matériaux voisins : brique, tuile, matériaux réfractaires, verre Résumé : DESIGNING
Designing ceramic components for durability
Durability evaluation of ceramic components using cares/life
Probabilistic micromechanics and macromechanics of polymer matrix composites
THERMOMECHANICAL TESTING
Burner big thermal fatigue of SiC continuous fiber slicon nitride composites under constant applied stress
High-temperature compression thest technique for continuous fiber ceramic composites
Experimental characterization and theoretical modeling of an advanced silicon nitride ceramic
NONDESTRUCTIVE EVALUATION
Acoustic microscopic characterization of fiber/matrix interface of SiC fiber-reinforced reaction-bonded Si3N4 matrix composites
Scanning acoustic microscopy of SCS-6 SiC fibers in titanium matrices
The use of local computerized tomographic inspection for nondestructive evaluation of ceramic components
Nondestructive evaluation of ceramic and metal matrix composites for NASA's materials programs
TECHNOLOGY BENEFITS ESTIMATION
Technology benefits estimator (T/BEST) for aerospace propulsion systemsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003894 620.14 GEN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Composite Materials / PILATO, Louis, A.
Titre : Advanced Composite Materials Type de document : texte imprimé Auteurs : PILATO, Louis, A. ; MICHNO, Michael, J. Editeur : Springer Verlag Année de publication : 1994 Importance : 208 p. ISBN/ISSN/EAN : 978-0-387-57563-6 Note générale : Preface
Table of Contents
Abbreviations
Units
Subject IndexCatégories : Composites Index. décimale : 620.19 Autres matériaux Résumé : Introduction
Matrix resins
High performance fibers
Analysis/testing
Composite interphase
Composite mechanical properties
Composite structure-property guidelines
Composite compressive strength
Damage tolerant composites : post impact compressive strength
Thermoplastic composites
ApplicationsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004242 620.19 PIL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Composites / Ivana K. PARTRIDGE
Titre : Advanced Composites Type de document : texte imprimé Auteurs : Ivana K. PARTRIDGE Editeur : Elsevier Applied Science Publishers, Ltd Année de publication : 1989 Importance : 439 p. ISBN/ISSN/EAN : 978-1-85166-387-3 Note générale : Preface
Contents
Introduction
IndexCatégories : Composites Index. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : High temperature thermosetting matrix resins
Continuous fibre reinforced thermoplastic matrix composites
High performance fibres
Approaches to toughness enhancement
Reinforced plastics in anti-corrosion applications
Inorganic matrix composites
Advanced composite fabrication
Design of bonded structures
Delamination
The fatigue of organic matrix composite materials
Damage tolerance and damage assessment in advanced composites
Certification of civil aircraft composite structuresExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004623 620.11 PAR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Fracture Mechanics / M. F. KANNINNEN
Titre : Advanced Fracture Mechanics Type de document : texte imprimé Auteurs : M. F. KANNINNEN ; Carl H. POPELAR Editeur : Oxford University Press Année de publication : 1985 Collection : The Oxford Engineering Science Series num. 15 Importance : 563 p. ISBN/ISSN/EAN : 978-0-19-503532-2 Note générale : Preface
Contents
Introduction and overview
References
Appendix
IndexCatégories : Rupture, Mécanique de la Index. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Elements of solid mechanics
Linear elastic fracture mechanics
Dynamic fracture mechanics
Elastic-plastic fracture mechanics
Fracture mechanics models for fiber reinforced composites
Time-dependent fracture
Some nonlinear aspects of fatigue crack propagation$Sources of information in fracture mechanicsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004635 620.11 KAN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Mechanics of Materials / Arthur Peter BORESI
Titre : Advanced Mechanics of Materials Type de document : texte imprimé Auteurs : Arthur Peter BORESI ; Richard J. SCHMIDT ; Omar M. SIDEBOTTOM Mention d'édition : Fifth edition Editeur : John Wiley & Sons, Inc. Année de publication : 1993 Importance : 811 p. ISBN/ISSN/EAN : 978-0-471-60009-1 Note générale : Preface
Contents
Appendix
Author index
Subject indexCatégories : Matériaux
Matériaux:Propriétés mécaniques
Résistance des matériauxIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : FUNDAMENTAL CONCEPTS
Theories of stress and strain
Linear stress-strain-temperature relations
Inelastic material behavior
Applications of energy methods
CLASSICAL TOPICS IN ADVANCED MECHANICS
Torsion
Nonsymmetrical bending of straight beams
Shear center for thin-wall beam cross sections
Curved beams
Beams on elastic foundations
The thick-wall cylinder
Elastic and inelastic stability of columns
SELECTED ADVANCED TOPICS
Flat plates
Stress concentrations
Fracture mechanics
Fatigue : progressive fracture
Creep. Time-dependent deformation
Contact stresses
The finite element methodExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003634 620.1 BOR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Mechanics of Materials / Robert D. COOK
Titre : Advanced Mechanics of Materials Type de document : texte imprimé Auteurs : Robert D. COOK ; YOUNG, Warren, C. Editeur : Macmillan Publishing Company Année de publication : 1985 Importance : 539 p. ISBN/ISSN/EAN : 978-0-02-324620-3 Note générale : Preface
Contents
Answers to selected problems
Author index
Subject indexCatégories : Matériaux
Matériaux:Propriétés mécaniques
Résistance des matériaux
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Stress, strain, energy and failure
Plane theory of elasticity
Thick-walled cylinders and spinning disks
Symmetric bending of circular plates
Elastic foundations
Thin shells of revolution
Deflections, reactions and energy methods
Torsion
Unsymmetric bending, shear center and thin-walled beams
Curved beams
Plastic collapse and limit analysis
Beam-columns, buckling and nonlinearityExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004647 620.1 COO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advanced Strength and Applied Elasticity : The SI version / A. C. UGURAL
Titre : Advanced Strength and Applied Elasticity : The SI version Type de document : texte imprimé Auteurs : A. C. UGURAL ; S. K. FENSTER Editeur : Edward Arnold (Publishers) Ltd Année de publication : 1981 Importance : 423 p. ISBN/ISSN/EAN : 978-0-7131-3436-0 Note générale : Contents
Preface to SI Version
Preface to the first edition
List of symbols
IndexCatégories : Elasticité Index. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Analysis of stress
Strain and stress-strain relations
Two-dimensional problems in elasticity
Mechanical behavior of materials
Bending of beams
Torsion and prismatic bars
Numerical methods
Axisymmetrically loaded members
Beams on elastic foundations
Energy methods
Elastic stability
Plastic behavior of solids
Introduction to plates and shellsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003688 620.1 UGU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advances in Boundary Element Methods for Fracture Mechanics / ALIABADI, M., H.
Titre : Advances in Boundary Element Methods for Fracture Mechanics Type de document : texte imprimé Auteurs : ALIABADI, M., H. ; BREBBIA, C., A. Editeur : Elsevier Science Publishers, Ltd Année de publication : 1993 Importance : 292 p. ISBN/ISSN/EAN : 978-1-85166-860-1 Note générale : Contents
Preface
ReferencesCatégories : Mécanique des solides
Résistance des matériaux
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Dual boundary element analysis of fatigue crack growth
BEM computations of elastodynamic fields in bodies containing internal, near-surface and surface-breaking cracks
The boundary element method as a tool in the design of composite laminates - theory and application
Body force method
Special crack-tip elemnts for 3D problems
Stress intensity factor weight functions for cracks in 3-D finite geometries
Application of the boundary element method to anisotropic crack problemsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003551 620.1 ALI Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advances in Crack Length Measurement / BEEVERS, C., J.
Titre : Advances in Crack Length Measurement Type de document : texte imprimé Auteurs : BEEVERS, C., J. Editeur : Engineering Materials Advisory Services Ltd, (EMAS) Année de publication : 1982 Importance : 504 p. ISBN/ISSN/EAN : 978-0-9506820-4-4 Note générale : Preface
Contents
NomenclatureCatégories : Matériaux
Matériaux:Fissuration
Matériaux:Fissuration:Mesure
Rupture, Mécanique de laIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Direct observations
d.c. potential difference
a.c. potential difference
Automated methods
Compliance techniques
Acoustic methodsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003939 620.1 BEE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advances in Damage Mechanics : Metals and Metal Matrix Composites / VOYIADJIS, G., Z.
Titre : Advances in Damage Mechanics : Metals and Metal Matrix Composites Type de document : texte imprimé Auteurs : VOYIADJIS, G., Z. ; KATTAN, P., I. Editeur : Elsevier Science Publishers, Ltd Année de publication : 1999 Importance : 541 p. ISBN/ISSN/EAN : 978-0-08-043601-2 Note générale : Preface
Contents
References
Appendices : Listing of Damage Formulas
Subject IndexCatégories : Composites
Composites:Propriétés mécaniques
Déformations (mécanique)
Déformations (mécanique):Modèles mathématiques
Endommagement, Mécanique de l' (milieux continus)
Endommagement, Mécanique de l' (milieux continus):Modèles mathématiques
Métaux
Métaux:Propriétés mécaniquesIndex. décimale : 620.16 Métaux et leurs alliages Résumé : Introduction
ISOTROPIC DAMAGE MECHANICS - SCALAR FORMULATION
Uniaxial tension in metals
Uniaxial tension in elastic metal matrix composites
Uniaxial tension in elastoplastic metal matrix composites : vector formulation of the overall approach
ANISOTROPIC DAMAGE MECHANICS - TENSOR FORMULATION
Damage and elasticity in metals
Damage and plasticity in metals
Metal matrix composites - Overall approach
Metal matrix composites - Local approach
Equivalence of the overall and local approaches
metal matrix composites - Local and interfacial damage
Symmetrization of the effective stress tensor
Experimental damage investigation
High cyclic fatigue damage for uni-directional metal matrix composites
Anisotropic cyclic damage-plasticity models for metal matrix composites
ADVANCED TOPICS IN DAMAGE MECHANICS
Damage in metal matrix composites using the generalized cells model
The kinematics of damage for finite-strain elasto-plastic solids
A coupled anisotropic damage model for the inelastic response of composite materialsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004256 620.16 VOY Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Advances in Fiber Composite Materials / Takehito FUKUDA
Titre : Advances in Fiber Composite Materials Type de document : texte imprimé Auteurs : Takehito FUKUDA ; Zenichiro MAEKAWA ; Torfu FUJI Editeur : Elsevier Science Publishers, Ltd Année de publication : 1994 Collection : Current Japanese Materials Research num. 12 Importance : 278 p. ISBN/ISSN/EAN : 978-0-444-81793-8 Note générale : Foreword
Preface
Contents
List of Contributors
Subject IndexCatégories : Composites à fibres Index. décimale : 620.197 Matériaux fibreux d'origine végétale et animale : textiles, papier Résumé : Mechanical behavior and fracture
Fatigue
Design
ManufacturingExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004193 620.197 FUK Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Aide-mémoire : Contrôle des matériaux / Jean PERDIJON
Titre : Aide-mémoire : Contrôle des matériaux Type de document : texte imprimé Auteurs : Jean PERDIJON Editeur : Dunod Année de publication : 2003 Importance : 196 p. ISBN/ISSN/EAN : 978-2-10-007005-3 Note générale : Table des matières
Avant-propos
Conclusion
Annexe
Glossaire
IndexCatégories : Contrôle non destructif
Matériaux
Matériaux:EssaisIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : QUALITE ET CONTROLE
Le contrôle de la qualité
Les qualités d'un matériau
La qualité du contrôle
LES CONTROLES DESTRUCTIFS
Les contrôles spécifiques
Les essais mécaniques
L'examen de structure
LES CONTROLES NON DESTRUCTIFS
Généralités et méthodes de contrôle superficiel
Le contrôle radiographique
Le contrôle par ultrasonsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004625 620.11 PER Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Aide-mémoire : Matières plastiques / Marc CARREGA
Titre : Aide-mémoire : Matières plastiques Type de document : texte imprimé Auteurs : Marc CARREGA Editeur : Dunod Année de publication : 2005 Collection : Aide-mémoire de l'ingénieur Importance : 231 p. ISBN/ISSN/EAN : 978-2-10-007548-5 Note générale : Tables des matières
Avant-propos
Index alphabétique
Index des produitsCatégories : Matières plastiques Index. décimale : 620.192 Polymères, plastiques Résumé : PRESENTATION GENERALE DES MATERIAUX POLYMERES
Nature et structure des matériaux polymères
Propriétés des matériaux polymères
Mise en forme des polymères
MONOGRAPHIES
Polymères de grande diffusion
Polymères techniques
Polymères techniques haute température
Polymères fluorés
Elastomères
CHOIX D'UN MATERIAU POLYMERE
Critères de choixExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00007260 620.192 CAR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 Aide-mémoire : Résistance des matériaux, matériaux de construction / Charles MONDIN
Titre : Aide-mémoire : Résistance des matériaux, matériaux de construction : A l'usage des ingénieurs, architectes, entrepreneurs Type de document : texte imprimé Auteurs : Charles MONDIN, Auteur Mention d'édition : 2e édition Editeur : Dunod Année de publication : 1954 Importance : 366 p. Note générale : Table des matières
Table alphabétique des matières
Bibliographie
Tables et formules usuellesLangues : Français (fre) Catégories : Résistance des matériaux
TopographieIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Résistance des matériaux et béton armé
Matériaux de construction
Topographie. Tachéométrie
Hydraulique. Ecoulement des eauxExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00011005 620.11 MON Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Airframe Stress Analysis and Sizing / Michael Chung-Yung NIU
Titre : Airframe Stress Analysis and Sizing Type de document : texte imprimé Auteurs : Michael Chung-Yung NIU Mention d'édition : Second edition Editeur : Conmilit Press, Ltd. Année de publication : 1997 Importance : 795 p. ISBN/ISSN/EAN : 978-962-7128-08-3 Note générale : Preface
Contents
Abbreviations, Acronyms and Nomenclature
Assingnments
Appendices
IndexCatégories : Avions
Avions:Conception et construction
Avions:MatériauxIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : General Overview
Sizing Procedures
External Loads
Material Properties
Structural Analysis
Beam Stress
Plates and Shells
Box Beams
Joints and Fittings
Column Buckling
Buckling of Thin Sheets
Shear Panels
Cutouts
Compression Panels
Damage Tolerant Panels (Tension)
Structural Salvage and Repairs
Structural Test SetupExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00007238 620.11 NIU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00007249 620.11 NIU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Alliages magnétiques et ferrites / M. G. SAY
Titre : Alliages magnétiques et ferrites Type de document : texte imprimé Auteurs : M. G. SAY, Auteur Editeur : Dunod Année de publication : 1956 Importance : 247 p. Note générale : Préface
Table des matières
IndexCatégories : Alliages
Ferromagnétisme
Matériaux magnétiquesIndex. décimale : 620.17 Métaux ferreux (fer et acier) et leurs alliages Résumé : Théorie du ferromagnétisme
Matériaux magnétiques doux
Aciers et alliages à aimantation permanente
Ferrites à aimantation permanente
Noyaux magnétiques en poudre
Alliages magnétiques compensateurs et ferreux amagnétiques
Matériaux pour enregistrement magnétique
Matériaux magnétostrictifsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00011130 620.17 SAY Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible Les alliages à mémoire de forme / Etienne PATOOR
Titre : Les alliages à mémoire de forme Type de document : texte imprimé Auteurs : Etienne PATOOR ; Marcel BERVEILLER Editeur : Hermès Science Publications Année de publication : 1990 Collection : Technologies de pointe Importance : 62 p. ISBN/ISSN/EAN : 978-2-86601-236-6 Note générale : Table des matières.
Introduction.
Photos noir et blanc.
Conclusion.Catégories : Alliages
Alliages:Propriétés mécaniques
Effet mémoire de forme
Métaux:Traitement thermomécaniqueIndex. décimale : 620.16 Métaux et leurs alliages Résumé : Mécanismes et thermodynamique de la transformation martensitique.
Propriétés thermomécaniques des alliages à mémoire de forme.
Applications des alliages à mémoire de forme.Exemplaires (3)
Code-barres Cote Support Localisation Section Disponibilité B00000498 620.16 PAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00004768 620.16 PAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 B00005872 620.16 PAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible