BIBLIOTHÈQUE - ACCÈS LIBRE
600 - Sciences appliquées - Technologie
Dans le rayon 600 - Sciences appliquées - Technologie il y a différentes étagères, cliquez dessus pour les explorer...Sciences de la nature et mathématiques | Techniques (Sciences appliquées) |
Affiner la recherche
The Behavior of Thin Walled Structures : Beams, Plates, and Shells / VINSON, Jack, R.
Titre : The Behavior of Thin Walled Structures : Beams, Plates, and Shells Type de document : texte imprimé Auteurs : VINSON, Jack, R. Editeur : Kluwer Academic Publishers Année de publication : 1989 Importance : 182 p. ISBN/ISSN/EAN : 978-90-247-3663-8 Note générale : Contents
Preface
Appendices
IndexCatégories : Coques (ingénierie)
Plaques (ingénierie)
Structures à parois mincesIndex. décimale : 624.17 Théorie des structures Résumé : Equations of linear elasticity in cartesian coordinates
Derivation of the governing equations for beams and rectangular plates
Beams and rods
Solutions to problems of rectangular plates
Thermal stresses in plates
Circular plates
Buckling of columns and plates
The vibrations of beams and plates
Energy methods in beams, columns and plates
Cylindrical shells
Elastic stability of shells
The vibration of cylindrical shellsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004572 624.17 VIN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Behaviour of Short Fatigue Cracks / K., J. MILLER
Titre : The Behaviour of Short Fatigue Cracks Type de document : texte imprimé Auteurs : K., J. MILLER ; E. R. DE LOS RIOS Editeur : Mechanical Engineering Publications, Ltd Année de publication : 1986 Collection : EGF num. 1 Importance : 560 p. ISBN/ISSN/EAN : 0-85298-614-7 Note générale : Contents
An introduction
Summary
References
Conclusions
IndexCatégories : Matériaux
Matériaux:Fatigue
Rupture, Mécanique de laIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Design considerations
Material and specimen preparation effects
Environmental aspects
Microstructural considerations
Notches
Fracture mechanicsExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité B00003999 620.11 MIL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible B00006295 620.11 MIL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Bending and Stretching of Plates / E. H. MANSFIELD
Titre : The Bending and Stretching of Plates Type de document : texte imprimé Auteurs : E. H. MANSFIELD Mention d'édition : Second edition Editeur : Cambridge : Cambridge Univeristy Press Année de publication : 1989 Importance : 228 p. ISBN/ISSN/EAN : 978-0-521-33304-7 Note générale : Contents
Preface
Principal notation
References
Author index
Subject indexCatégories : Plaques et coques élastiques Index. décimale : 624.17 Théorie des structures Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003635 624.17 MAN Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Collected Works of Stefan Neumark (1897-1967) / OPPENHEIM, Antoni, K.
Titre : The Collected Works of Stefan Neumark (1897-1967) Type de document : texte imprimé Auteurs : OPPENHEIM, Antoni, K., Éditeur scientifique ; THOMAS, H., H., B., M., Éditeur scientifique ; Sir James LIGHTHILL Editeur : Mono Book Corp. Année de publication : 1972 Importance : 805 p. Note générale : Preface
Contents
Chronological List of Publications of S. Neumark
Foreword
Symbols
References
AppendicesIndex. décimale : 629.1 Génie aérospatial Résumé : / Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004508 629.1 OPP Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Continuum Theory of Rock Mechanics / Csaba ASSZONYI
Titre : The Continuum Theory of Rock Mechanics Type de document : texte imprimé Auteurs : Csaba ASSZONYI ; Richard RICHTER Mention d'édition : First edition Editeur : Trans Tech Publications, Ltd Année de publication : 1979 Importance : 332 p. ISBN/ISSN/EAN : 978-0-87849-027-1 Note générale : Contents
Foreword
Introduction
Symbols
AppendixCatégories : Rhéologie
Roches, Mécanique desIndex. décimale : 624.13 Résumé : THEORETICAL BASES OF THE RHEOLOGICAL PHENOMENA
Stresses and states of stresses
State of deformation
Mechanical equations of state
Approximate material equations for rocks
Fundamental rheological relationships of rock mechanics
How to solve the fundamental equations of rock mechanics
EFFECT OF OPENINGS IN A RHEOLOGICAL MEDIUM
The primary state
Mechanical fields due to the driving of openings
Mine openings of circular section in a medium with a hydrostatic primary-stress distribution
mechanical field about a roadway ; case of a planar state of stress
Roadways of circular cross-section driven in a primary field of arbitrary orientation
Interaction in the binary system of rock and supportExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004958 624.13 ASS Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Detonation Phenomenon / John, H., S. LEE
Titre : The Detonation Phenomenon Type de document : texte imprimé Auteurs : John, H., S. LEE, Auteur Editeur : Cambridge : Cambridge Univeristy Press Année de publication : 2008 Importance : 388 p. ISBN/ISSN/EAN : 978-0-521-89723-5 Note générale : Contents
Preface
Introduction
Epilogue
IndexCatégories : Explosifs
Gaz, Dynamique des
Ondes de détonation
Simulation par ordinateurIndex. décimale : 662.2 Explosifs Résumé : Gasdynamic Theory of Detonations and Deflagrations
Dynamics of Detonation Products
Laminar Structure of Detonations
Unstable Detonations : Numerical Description
Unstable Detonations : Experimental Observations
Influence of Boundary Conditions
Deflagrations-to-Detonation Transition
Direct Initiation of DetonationsExemplaires (3)
Code-barres Cote Support Localisation Section Disponibilité B00013138 662.2 LEE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 B00013139 662.2 LEE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 B00014598 662.2 LEE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 The Digital Differential Analyser / SIZER, T., R. H.
Titre : The Digital Differential Analyser Type de document : texte imprimé Auteurs : SIZER, T., R. H., Éditeur scientifique Editeur : Chapman and Hall, Ltd. Année de publication : 1968 Importance : 201p. Note générale : Contributors
Foreword
Contents
Appendices
IndexCatégories : Analyseurs différentiels électroniques Index. décimale : 621.381 Electronique appliquée, micro-électronique Résumé : The Digital Differential Analyser
The Principles of Incremental Representation
The Principles of Programming
Error Analysis
Sampled Data Theory Applied to the D.D.A.
The problems of Aircraft Stability and Cotrol
The Simultaneaous D.D.A.
Airborne NavigationExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00007303 621.381 SIZ Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Electric Arc / J. M. SOMERVILLE
Titre : The Electric Arc Type de document : texte imprimé Auteurs : J. M. SOMERVILLE Editeur : Methuen & Co, Ltd Année de publication : 1959 Collection : Monographs on physical subjects Importance : 150 p. Note générale : Preface
Introduction
References
IndexCatégories : Arc électrique Index. décimale : 621.7 Techniques de l'énergie solaire : fours solaire Résumé : Introduction
THE STABLE ARC
The long column
The electrode-column junctions
THE APPROACH TO THE STABLE ARC
The spark
Other ways of striking arcsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003188 621.7 SOM Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Electrical Resistivity of Metals and Alloys / Paul L. ROSSITER
Titre : The Electrical Resistivity of Metals and Alloys Type de document : texte imprimé Auteurs : Paul L. ROSSITER Editeur : Cambridge : Cambridge Univeristy Press Année de publication : 1987 Importance : 434 p. ISBN/ISSN/EAN : 978-0-521-40872-1 Note générale : Contents
Preface
Appendix
References
IndexCatégories : Alliages
MétauxIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Basic concepts
Atomic configuration of an alloy
The structure of magnetic materials
Electrons in simple metals and alloys
Electrical resistivity of simple metals and alloys
Non-simple, non-magnetic metals and alloys
Magnetic and nearly magnetic alloys
Other phenomenaExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004936 620.11 ROS Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Electrolytic and Chemical Polishing of Metals in Research and Industry / William John McGregor TEGART
Titre : The Electrolytic and Chemical Polishing of Metals in Research and Industry Type de document : texte imprimé Auteurs : William John McGregor TEGART, Auteur Mention d'édition : 2e édition revue Editeur : Pergamon Press, Ltd Année de publication : 1959 Importance : 139 p. Note générale : Contents
Foreword
Acknowledgments
Appendix
References
IndexCatégories : Chimie industrielle
Métallurgie
Metallurgie physique
Polissage électrolytiqueIndex. décimale : 661 Technologie des produits chimiques industriels (chimie lourde) Résumé : The Mechanism of Electrolytic Polishing
The Electrical Characteristics of the Polishing Process
Factors Influencing Polishing Conditions
Laboratory and Research Applications of Electrolytic Polishing
General Principles for Laboratory Methods
The Use of Perchloric Acid and Other Reactive Solutions in Electropolishing
Laboratory Methods for Specific Metals and their Alloys
Industrial Applications of Electrolytic Polishing
Industrial Methods for Specific Metals and their Alloys
Chemical Polishing and its Application in the Laboratory
Industrial Methods for the Chemical Polishing of Specific Metals and their AlloysExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00011107 661 TEG Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Field Guide to Human-Centered Design
Titre : The Field Guide to Human-Centered Design Type de document : texte imprimé Editeur : IDEO.org Année de publication : 2015 Importance : 189 p. ISBN/ISSN/EAN : 978-0-9914063-1-9 Note générale : Contents
Introduction
Resources
ColophonCatégories : Conception centrée sur l'utilisateur
Créativité
Design thinkingIndex. décimale : 658.4 Encadrement Résumé : Mindsets
METHODS
Inspiration
Ideation
ImplementationExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00014473 658.4 THE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Finite Element Method for Engineers / HUEBNER, Kenneth, H.
Titre : The Finite Element Method for Engineers Type de document : texte imprimé Auteurs : HUEBNER, Kenneth, H. ; THORNTON, Earl, A. ; BYROM, Ted, G. Mention d'édition : Third édition Editeur : John Wiley & Sons, Inc. Année de publication : 1995 Importance : 627 p. ISBN/ISSN/EAN : 978-0-471-54742-6 Note générale : Ill., schémas, graph., tableau.
Préface.
Préface to the second edition.
Préface to the first edition.
Contents.
Appendix.
Author index.
Subject index.Index. décimale : 620.001 Ingénierie et activités connexes - Philosophie et théorie Résumé : Meet the Finite Element Method.
The Direct Approach : A Physical Interpretation.
The Mathematical Approach : A Variational Interpretation.
The Mathematical Approach : A Generalized Interpretation.
Elements and Interpolation Functions.
Elasticity Problems.
General Field Problems.
Heat Transfer Problems.
Fluid Mechanics Problems.
A Sample Computer Code and Other Practical Considerations.
Matrices.
Variational Calculus.
Basic Equations from Linear Elasticity Theory.
Basic Equations from Fluid Mechanics.
Basic Equations from Heat Transfer.Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00000092 620.001 HUE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Finite Element Method for Three-Dimensional Thermomechanical Applications / Guido DHONDT
Titre : The Finite Element Method for Three-Dimensional Thermomechanical Applications Type de document : texte imprimé Auteurs : Guido DHONDT, Auteur Editeur : John Wiley & Sons, Inc. Année de publication : 2004 ISBN/ISSN/EAN : 0-470-85752-8 Note générale : Contents
Preface
Nomenclature
References
IndexLangues : Anglais (eng) Catégories : Contraintes thermiques
Éléments finis, Méthode desIndex. décimale : 620.112 Résumé : Displacements, Strain, Stress and Energy
Linear Mechanical Applications
Geometric Nonlinear Effects
Hyperelastic Materials
Infinitesimal Strain Plasticity
Finite Strain Elastoplasticity
Heat TransferExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00008768 620.112 DHO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 The Finite Element Method in Engineering / S.S. RAO
Titre : The Finite Element Method in Engineering Type de document : texte imprimé Auteurs : S.S. RAO Editeur : Pergamon Press, Ltd Année de publication : 1982 Importance : 625 p. ISBN/ISSN/EAN : 978-0-08-025466-1 Note générale : Preface
Contents
Principal notation
References
Appendix
IndexCatégories : Éléments finis, Méthode des
Mathématiques
Mathématiques de l'ingénieurIndex. décimale : 620.1 Mécanique de l'ingénieur (mécanique appliquée) et matériaux Résumé : Historical perspective
Statically determinate structures
Applies elasticity : Fundamental
Box beam stress analysis
Load transfer in stiffened panel structures
Work-energy principles
Force method : Trusses, beams, and frames
Force method : Idealized thin-walled structures
The matrix displacement method
Matrix displacement method : Trusses, beams and frames
Matrix displacement method : Thin-walled structures
Strucutral stabilityExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00005639 620.1 RAO Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Friction and Lubrication of Solids : Part I / Frank Philip BOWDEN
Titre : The Friction and Lubrication of Solids : Part I Type de document : texte imprimé Auteurs : Frank Philip BOWDEN ; D. TABOR Editeur : Oxford University Press Année de publication : 1971 Collection : International series of monographs on physics Importance : 391 p. ISBN/ISSN/EAN : 978-0-19-851204-2 Note générale : Preface
Contents
Introduction
Author index to part I
Author index to part II
Subject index to part IICatégories : Solides
Solides:Propriétés mécaniquesIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Area of contact between solids
Surface temperature of rubbing solids
Effect of frictional heating on surface flow
Friction and surface damage of sliding metals
Mechanism of metallic friction
Action of bearing alloys
Friction of clean surfaces : effect of contamination films
Friction of non-metals
Boundary friction of lubricated metals
Mechanism of boundary lubrication
Action of extreme pressure lubricants
Breakdown of lubricant films
nature of contact between colliding solids
The nature of metallic wear
Adhesion between solid surfaces : the influence of liquid films
Chemical reaction produced by friction and impactExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003744 620.11 BOW Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Friction and Lubrication of Solids : Part II / Frank Philip BOWDEN
Titre : The Friction and Lubrication of Solids : Part II Type de document : texte imprimé Auteurs : Frank Philip BOWDEN ; D. TABOR Editeur : Oxford University Press Année de publication : 1968 Collection : International series of monographs on physics Importance : 544 p. Note générale : Preface
Contents
Introduction
Author index to part I
Author index to part II
Subject index to part IICatégories : Solides
Solides:Propriétés mécaniquesIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : The solid surface
The influence of size and surface structure on the strength of solids
Contact of metals
Mechanism of metallic friction : role of combined stresses and surface contamination
The adhesion of clean metals
Metallic transfer in machining operations
Friction and adhesion of brittle solids
Friction, adhesion and deformation properties of ice and solid krypton
Friction of ski on snow and ice
deformation and friction of diamond
The friction of lamellar solids
Lubricating films of lamellar solids
The friction and deformation of polymeric materials
The friction of elsatic solids
The mechanism of rolling friction
The hardness of solids
Wear of solids
boundary lubrication
Structure and properties of lubricant monolayers
Adhesion and surface energy of smooth surfaces
Mechanical properties and frictional properties of solids at high temperaturesFriction at very high speeds
The deformation of solids by liquid impact at supersonic speeds
Some early work on sliding and rolling frictionExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003740 620.11 BOW Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Fundamentals of Corrosion / John-Christopher SCULLY
Titre : The Fundamentals of Corrosion Type de document : texte imprimé Auteurs : John-Christopher SCULLY Mention d'édition : Third edition Editeur : Pergamon Press, Ltd Année de publication : 1990 Importance : 226 p. ISBN/ISSN/EAN : 978-0-08-037874-9 Note générale : Contents
Introduction
Bibliography
References
IndexCatégories : Corrosion Index. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : Oxidation
Aqueous corrosion
The protection of metals
Corrosion failures and attackExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003868 620.11 SCU Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Generation of Electricity by Wind Power / GOLDING, E., W.
Titre : The Generation of Electricity by Wind Power Type de document : texte imprimé Auteurs : GOLDING, E., W. ; HARRIS, R., I. Mention d'édition : reprinted ed. Editeur : Spon Press Année de publication : 1978 Importance : 332 p. ISBN/ISSN/EAN : 978-0-419-11070-5 Note générale : Prefaces
Contents
Selected Bibliography of Surface Wind Data
Glossary of Terms used in the Study of Wind Power
Appendix
Recent Developments in Wind-Power Research
Subject Index
Name IndexCatégories : Centrales électriques
Energie éolienne
VentsIndex. décimale : 621.45 Techniques utilisant le vent : moulins, éoliennes Résumé : Introductory
The history of windmills
Estimation of the energy obtainable from the wind
Wind characteristics and distribution
Wind power sites
Wind surveys
Wind flow over hills
The measurement of wind velocity
Wind structure and its determination
Wind data and energy estimation
The testing of wind-driven A.C. generators
Wind-driven machines
Propeller type windmills
Plants for isolated premises and small communities
The economy of wind power generation
Construction costs for large wind-driven generators
The relationship of wind power to other power sources
Research and development
International co-operationExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00005771 621.45 GOL Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Grand Designers: The Evolution of the Airplane in the 20th Century / John D. ANDERSON
Titre : The Grand Designers: The Evolution of the Airplane in the 20th Century Type de document : texte imprimé Auteurs : John D. ANDERSON Editeur : Cambridge : Cambridge Univeristy Press Année de publication : 2018 Importance : 306 p. ISBN/ISSN/EAN : 978-0-521-81787-5 Note générale : Contents
Preface
Appendices
IndexCatégories : Avions:Conception et construction:Histoire:20e siècle Index. décimale : 629.13 Aéronautique : Appareils, installation, technique de la navigation, pilotage Résumé : Introduction: Before the Beginning
The Beginning: The Wright Brothers and Their Design Process
Setting the Gold Standard: The Design Methodology of Frank Barnwell
Products of the First Design Revolution: Arthur Raymond and the DC-3
Design for Speed: R. J. Mitchell and the Spitfire
Design Perfection: Edgar Schmued and the P-51 Mustang
Defying the Limits: The Jet Airplane, the Second Design Revolution, and Kelly Johnson
Airplane Design and the Grand Designers: The End GameExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00014550 629.13 AND Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The History of the Theory of Structures / Karl-Eugen KURRER
Titre : The History of the Theory of Structures : from Arch Analysis to Computational Mechanics Type de document : texte imprimé Auteurs : Karl-Eugen KURRER, Auteur Editeur : Berlin : Ernst & Sohn Année de publication : 2008 Importance : 848 p. ISBN/ISSN/EAN : 978-3-433-01838-5 Note générale : Foreword
Contents
Preface
Preface to the first, German edition
Brief bibliographies
Bibliography
Name index
Subject indexLangues : Anglais (eng) Catégories : Constructions, Théorie des
Résistance des matériauxIndex. décimale : 624.17 Théorie des structures Résumé : The tasks and aims of a historical study of theory of structures
Learning from the history of structural analysis : 11 introductory essays
The first fundamental engineering science disciplines : theory of structures and applied mechanics
From masonry arch to elastic arch
The beginings of a theory of structures
The discipline-formation period of the theory of structures
From construction with iron to modern structural steelwork
Member analysis conquers the third dimension : the spatial framework
Reinforced concrete's influence on theory of structures
From classical to modern theory of structures
Twelve scientific controverties in mechanics and theory of structures
Perspectives for theory of structuresExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00008082 624.17 KUR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 The Making and Evaluation of Holograms / Nils ABRAMSON
Titre : The Making and Evaluation of Holograms Type de document : texte imprimé Auteurs : Nils ABRAMSON Editeur : Academic Press, Inc. Année de publication : 1981 Importance : 326 p. ISBN/ISSN/EAN : 978-0-12-042820-5 Note générale : Preface
Contents
Subject IndexCatégories : Holographie Index. décimale : 621.36 Optique appliquée Résumé : Interference
The holographic process
Holography for measurement of dimensions, deformations and vibrations
Evaluation of fringes caused by out-of-plane motion
Evaluation of fringes caused by in-plane motion
Fringe reading and manipulating
Equipment and methodsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00005939 621.36 ABR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Materials Science of Thin Films / Milton OHRING
Titre : The Materials Science of Thin Films Type de document : texte imprimé Auteurs : Milton OHRING Editeur : Academic Press, Inc. Année de publication : 1992 Importance : 704 p. ISBN/ISSN/EAN : 978-0-12-524990-4 Note générale : Contents
Foreword
Preface
Acknowledgements
Thin Film - A Historical Perspective
Appendix 1 : Physical Constants
Appendix 2 : Selected Conversions
IndexCatégories : Couches minces
Science des matériauxIndex. décimale : 620.112 Résumé : Review of Materials Science
Vacuum Science and Technology
Physical Vapor Deposition
Chemical Vapor Deposition
Film Formation and structure
Characterization of Thin Films
Epitaxy
Interdiffusion and Reactions in Thin Films
Mechanical Properties of Thin Films
Electrical and Magnetic Properties of Thin Films
Optical Properties of Thin Films
Metallurgical and Protective Coatings
Modification of Surfaces and Films
Emerging Thin-Film Materials and ApplicationsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00004823 620.112 OHR Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Mathematics of Computerized Tomography / F. NATTERER
Titre : The Mathematics of Computerized Tomography Type de document : texte imprimé Auteurs : F. NATTERER Mention d'édition : reprinted ed. Editeur : John Wiley & Sons, Inc. Année de publication : 1989 Importance : 222 p. ISBN/ISSN/EAN : 978-0-471-90959-0 Note générale : Contents
Preface
Glossary of Symbols
References
IndexCatégories : Algorithmes
Imagerie (technique)
Tomographie (mathématiques)
Traitement d'images
Traitement d'images:Techniques numériquesIndex. décimale : 621.361 Spectroscopie industrielle Résumé : Computerized tomography
The Radon transform and related transforms
Sampling and resolution
Ill-posedness and accuracy
Reconstruction algorithms
Incomplete data
Mathematical toolsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00006066 621.361 NAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible The Mathematics of Computerized Tomography / F. NATTERER
Titre : The Mathematics of Computerized Tomography Type de document : texte imprimé Auteurs : F. NATTERER Mention d'édition : reprinted ed. Editeur : John Wiley & Sons, Inc. Année de publication : 2001 Collection : In applied Mathematics num. 32 Importance : 222 p. ISBN/ISSN/EAN : 978-0-89871-493-7 Note générale : Contents
Preface
Glossary of Symbols
Errata
References
IndexCatégories : Algorithmes
Imagerie (technique)
Tomographie (mathématiques)
Traitement d'images
Traitement d'images:Techniques numériquesIndex. décimale : 621.361 Spectroscopie industrielle Résumé : Computerized tomography
The Radon transform and related transforms
Sampling and resolution
Ill-posedness and accuracy
Reconstruction algorithms
Incomplete data
Mathematical toolsExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00007877 621.361 NAT Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Sorti jusqu'au 15/05/2026 The Measurement of Crack Length and Shape During Fracture and Fatigue / BEEVERS, C., J.
Titre : The Measurement of Crack Length and Shape During Fracture and Fatigue Type de document : texte imprimé Auteurs : BEEVERS, C., J. Editeur : Engineering Materials Advisory Services Ltd, (EMAS) Année de publication : 1980 Importance : 468 p. ISBN/ISSN/EAN : 978-0-9506820-0-6 Note générale : Preface
Contents
Nomenclature
IntroductionCatégories : Matériaux
Matériaux:Fatigue
Matériaux:Fatigue:Mesure
Rupture, Mécanique de laIndex. décimale : 621 Génie mécanique - Physique appliquée Résumé : Compliance methods
Potential difference techniques
Acoustic emission
Ultrasonic methods
Special applications
Selection of techniquesExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité B00003990 621 BEE Ouvrage BIBLIOTHÈQUE - ACCÈS LIBRE 600 - Sciences appliquées - Technologie Disponible